EM91203 Ver la hoja de datos (PDF) - ELAN Microelectronics

Número de pieza

componentes Descripción

Fabricante

EM91203

TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE

ELAN Microelectronics 

EM91203 SERIES

TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE

Storing : EM91203 series support two operating methods to store numbers into SAVE redial memory.

Method 1

• To select Pulse or Tone mode.

• Off-hook (or turn on HF function), push d1, d2, .. , dn. The numbers d1, d2, .. , dn will be dialed out in Pulse

or Tone mode as selection.

• After dn had been dialed out and push [ST], Save key. If the keying numbers are more than 32 digits that

content of SAVE memory can not be updated. Otherwise, these numbers will be stored into SAVE memory.

In the [] key allows to be omitted.

Method 2

Off-hook (or turn on HF function), push ST, d1, d2, .. , dn, [ST], Save. If the keying numbers are not over 32

digits, the numbers d1, d2, .. , dn will be stored in SAVE redial memory automatically.

Dialing :

• To select Pulse or Tone mode.

• Off-hook (or turn on HF function), push Save key. The numbers stored in SAVE memory will be dialed out

in Pulse or Tone mode as selection.

Repertory memory

The EM91203 series incorporated several sets repertory memory and each one can store number up to 16 digits.

As in memory storing, if stored numbers are more than 16 digits that only the previous 16 digits can be stored

into specific memory. Otherwise, these numbers can be stored entirely. After memory dialed out, the content

of LNB is keeping to current data.

Storing of 3 sets memory

Direct (one-touch) operation

Off-hook (or turn on HF function), push ST, d1, d2, .. , dn [ST], EMn. The numbers d1, d2, .. , dn will be stored

into memory location “EMn”. The “EMn” expressed emergency memory EM1 to EM3.

Dialing (after memory dialed out, the content of LNB is keeping to current data)

Direct (one-touch) memory operation

• To select Pulse or Tone mode.

• Off-hook (or Turn on HF function), push EMn key. The numbers that are stored in direct memory location

EMn will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital number from 1~3 decided

by dialers’ memory sets.

Pause (P) key operation

The Pause (P) key is designed to support pause operation in dialing duration. “P” key can be stored in memory

and it will occupy one digital position.

* This specification are subject to be changed without notice.

10.1.1997 5

Share Link: