M62021 Ver la hoja de datos (PDF) - Renesas Electronics

Número de pieza

componentes Descripción

Fabricante

M62021

System Reset IC with Switch for Memory Backup

Renesas Electronics 

M62021L/P/FP

System Reset IC with Switch for Memory Backup

REJ03D0784-0200

Rev.2.00

Jun 15, 2007

Description

The M62021 is a system IC that controls the memory backup function of microcomputer (internal RAM).

The IC outputs reset signals (RES/RES) to a microcomputer at power-down and power failure. It also shifts the power

supply to RAM from main to backup, outputs a signal (CS) that invokes standby mode, and alters RAM to backup

circuit mode.

The M62021 contains, in a single chip, power supply monitor and RAM backup functions needed for a microcomputer

system, so that the IC makes it possible to construct a system easily and with fewer components compared with a

conventional case that uses individual ICs and discrete components.

Features

• Built-in switch for selection between main power supply and backup power supply to RAM.

• Small difference between input and output voltage (IOUT = 80 mA, VIN = 5 V) 0.2 V Typ

• Detection voltage (power supply monitor voltage) 4.40 V ± 0.2 V

• Chip select signal output (CS)

• Two channels of reset outputs (RES/RES)

• Power on reset circuit built-in

• Delay time variable by an external capacitance connected to Ct pin

• Facilitates to form backup function with a few number of components

Application

• Power supply control systems for memory backup of microcomputer system and SRAM boards with built-in backup

function that require switching between external power supply and battery.

Block Diagram

VIN 3

R1

R2

Com

–

+

1.24V

SW

Reset

circuit

RES 7

RES 5

Delay

circuit

6

GND

1 VOUT

D1

2 VBAT

8 CS

4 Ct

REJ03D0784-0200 Rev.2.00 Jun 15, 2007

Page 1 of 13

Share Link: