JV1-100V Ver la hoja de datos (PDF) - Matsushita Electric Works
Número de pieza
componentes Descripción
Fabricante
JV1-100V
Matsushita Electric Works
JV1-100V Datasheet PDF : 4 Pages
| |||
JV
5.-(1) Ambient temperature characteristics
(Standard 10 A type, 1 Form A)
Contact current: 10 A
Allowable ambient temperatures
against % coil voltage
300
(max. inside the coil temperature
set as 115°C 239°F)
200
Pick-up voltage with
a hot-start condition
of 100%V on the coil
100
Pick-up voltage
0 20 40 60 80 100 120
Ambient temperature, °C
5.-(4) Ambient temperature characteristics
(High sensitivity type)
Contact current: 10 A
300
High sensitivity
100 mW type
200
Standard
200 mW type
Allowable ambient
temperature
against % coil
voltages (max.
inside the coil temperature
set as 115°C 239°F)
100
5.-(2) Ambient temperature characteristics
(High capacity 15 A type, 1 Form A)
Contact current: 0 A, 10 A, 13 A, 15 A
300
200
100
0
0A
10 A
13 A
15 A
13 A 15 A
Allowable ambient
temperature against
% coil voltages
(max. inside the coil
temperature set as
115°C 239°F)
Pick-up voltage with
a hot-start condition
of 100%V on the coil
10 A Pick-up voltage
0A
20 40 60 80 100 120
Ambient temperature, °C
5.-(3) Ambient temperature characteristics
(1 Form C type)
Contact current: 10 A
Allowable ambient temperatures
against % coil voltages
(max. inside the coil temperature
200
set as 115°C 239°F)
Pick-up voltage
100
0
20
40
60
80
Ambient temperature, °C
0
0 20 40 60 80 100 120
Temperature rise, °C
Types dedicated to a wider variety of automotive applications are available, upon receipt of order, with the following specifications:
SPECIFICATIONS
Contact
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
Nominal switching capacity
Rating
(resistive Max. switching power
load)
Max. switching voltage
Max. switching current
Mechanical (at 300 cpm)
Expected
life (min. Electrical
ope.)
(DC 12 V motor, 6 A steady current,
20 A lock current)(at rated load)
Coil
Nominal voltage, V DC
Nominal operating power
Pick-up voltage, V DC (max.)
Drop-out voltage; V DC (min.)
Max. allowable voltage
1 Form C
100 mΩ
Silver alloy
10 A 125 V AC
6A 30 V DC
1,250 V AC
180 W
125 V (AC) 30 V (DC)
10 A (AC) 6 A (DC)
5×106
4×104
5, 6, 9, 12, 18, 24
450 mW
70% of nominal voltage
5% of nominal voltage
150% of nominal voltage
Characteristics
Max. operating speed
20 cpm
Initial insulation resistance
Min. 100 MΩ (at 500 V DC)
Initial break Between open contacts
down voltage Between contacts and coil
750 Vrms for 1 min.
1,500 Vrms for 1 min.
Operate time (at nominal voltage)
Approx. 5 ms
Release time (at nominal voltage)
Approx. 4 ms
Temperature rise (max.)
(at nominal voltage)(at 50°C)
65°C with nominal coil voltage and at
maximum allowable contact current
Shock resistance
Functional
Destructive
Min. 196 m/s2 {20 G}
Min. 980 m/s2 {100 G}
Vibration resistance
Functional
Destructive
10 to 55 Hz at double amplitude of
1.6 mm
10 to 55 Hz at double amplitude of
2 mm
Conditions for operation, Ambient
transport and storage
temp.
(Not freezing and condens-
ing at low temperature) Humidity
–40°C to +70°C
–40°F to +158°F
5 to 85%R.H.
Unit weight
Approx. 8 g .282 oz
For Cautions for Use, see Relay Technical Information (Page 11 to 39).
90
Share Link: