AC0805 Ver la hoja de datos (PDF) - YAGEO Corporation

Número de pieza

componentes Descripción

Fabricante

AC0805

Chip Resistor Surface Mount

YAGEO Corporation 

Chip Resistor Surface Mount AC SERIES 0402 to 2512

Product specification 7

10

TESTS AND REQUIREMENTS

Table 4 Test condition, procedure and requirements

TEST

TEST METHOD

PROCEDURE

High Temperature AEC-Q200 Test 3

Exposure

MIL-STD-202 Method 108

1,000 hours at TA = 125 °C, unpowered

REQUIREMENTS

±(1.0%+0.05 Ω)

<50 mΩ for Jumper

Moisture

Resistance

AEC-Q200 Test 6

MIL-STD-202 Method 106

Each temperature / humidity cycle is defined at

8 hours (method 106F), 3 cycles / 24 hours for

10d. with 25 °C / 65 °C 95% R.H, without steps

7a & 7b, unpowered

Parts mounted on test-boards, without

condensation on parts

±(0.5%+0.05 Ω) for 1% tol.

±(2.0%+0.05 Ω) for 5% tol.

<100 mΩ for Jumper

Biased

Humidity

AEC-Q200 Test 7

MIL-STD-202 Method 103

1,000 hours; 85 °C / 85% RH

10% of operating power

Measurement at 24±4 hours after test conclusion.

±(1.0%+0.05 Ω)

<100 mΩ for Jumper

Operational Life

AEC-Q200 Test 8

MIL-STD-202 Method 108

1,000 hours at 125 °C, derated voltage applied for ±(1.0%+0.05 Ω)

1.5 hours on, 0.5 hour off, still-air required

<100 mΩ for Jumper

Resistance to

Soldering Heat

AEC-Q200 Test 15

MIL-STD-202 Method 210

Condition B, no pre-heat of samples

Lead-free solder, 260±5 °C, 10±1 seconds

immersion time

Procedure 2 for SMD: devices fluxed and

cleaned with isopropanol

±(0.5%+0.05 Ω) for 1% tol.

±(1.0%+0.05 Ω) for 5% tol.

<50 mΩ for Jumper

No visible damage

Thermal Shock

AEC-Q200 Test 16

MIL-STD-202 Method 107

-55/+125 °C

Number of cycles is 300. Devices mounted

Maximum transfer time is 20 seconds.

Dwell time is 15 minutes. Air – Air

±(1.0%+0.05 Ω)

<50 mΩ for Jumper

ESD

AEC-Q200 Test 17

Human Body Model,

±(3.0%+0.05 Ω)

AEC-Q200-002

1 pos. + 1 neg. discharges 0402/0603: 1 KV,

0805 and above: 2 KV

<50 mΩ for Jumper

Feb 10, 2012 V.2

www.yageo.com

Share Link: