RT9245B
Parameter
DAC (VID0-VID5) pull up resistor
DAC Pull Up Voltage
VOSS Pin Voltage
Error Amplifier
DC Gain
Gain-Bandwidth Product
Slew Rate
Current Sense GM Amplifier
CSN Full Scale Source Current
CSN Current for OCP
Protection
Over-Voltage Trip (VFB − VDAC)
IMAX Voltage
Power Good
Output Low Voltage
Symbol
Test Conditions
VVOSS RVOSS = 100kΩ
GBW
SR
COMP = 10pF
IISPFSS
∆OVT
VIMAX
RADJ = 0Ω
RIMAX = 20kΩ
VPGOODL IPGOOD = 4mA
Min Typ Max Units
2.5 3.5 4.5 kΩ
--
2.1
--
V
0.9 1.0 1.1
V
--
60
--
dB
--
10
-- MHz
--
6
-- V/µs
100 --
--
µA
150 --
--
µA
320 400 450 mV
0.9 1.0 1.1
V
--
--
0.2
V
Note 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device. These are
for stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for
extended periods may remain possibility to affect device reliability.
Note 2. Devices are ESD sensitive. Handling precaution recommended.
Note 3. The device is not guaranteed to function outside its operating conditions.
Note 4. θJA is measured in the natural convection at TA = 25°C on a low effective single layer thermal conductivity test board of
JEDEC 51-3 thermal measurement standard.
www.richtek.com
8
DS9245B-02 March 2007