XL4012 Ver la hoja de datos (PDF) - XLSEMI
Número de pieza
componentes Descripción
Fabricante
XL4012 Datasheet PDF : 9 Pages
| |||
昆山东森微电子有限公司
电话:0512-50710709
12A 300KHz 32V Buck DC to DC Converter
Test Circuit and Layout guidelines
传真:0512-50111209
Datasheet
XL4012
Figure5. Standard Test Circuits and Layout Guides
Select R1 to be approximately 2K, use a 1% resistor for best stability.
C1 and CFF are optional; in order to increase stability and reduce the input power line noise, CIN
and C1 must be placed near to VIN and GND;
For output voltages greater than approximately 10V, an additional capacitor CFF is required. The
compensation capacitor is typically between 100 pf and 33 nf, and is wired in parallel with the
output voltage setting resistor, R2. It provides additional stability for high output voltage, low
input-output voltages, and/or very low ESR output capacitors, such as solid tantalum capacitors.
CFF=1/(31*1000*R2); This capacitor type can be ceramic, plastic, silver mica, etc. (Because of
the unstable characteristics of ceramic capacitors made with Z5U material, they are not
recommended.)
www.ksmcu.com
Share Link: 