BD6883GUL,BH6453GUL,BD6886GUL,BD6369GUL
Technical Note
●I/O Truth Table
BD6883GUL I/O Truth Table
MODE
INPUT
PS
IN
OUTPUT
OUT
OUTPUT MODE
-
H
L
H
L
H
Sink
Source
-
L
X
Z※7
Standby
L: Low, H: High, X: Don’t care, Z: Hi impedance
Sink is a direction of current flowing into the driver, and Source is a direction of current flowing out the driver.
When it is sink, which drive FULL ON.
※7Z at the Constant-Voltage driver output L voltage for connect feedback resistance (20kΩ Typ.) for output H voltage setting between OUT pin and GND.
But output Power MOS is OFF condition.
BH6453GUL I/O Truth Table
MODE
INPUT
PS
IN
OUTPUT
OUT
OUTPUT MODE
-
H
H
L
L
H
Sink
Source
-
L
X
Z
Standby
L: Low, H: High, X: Don’t care, Z: Hi impedance
Sink is a direction of current flowing into the driver, and Source is a direction of current flowing out the driver.
When it is source, which drive FULL ON.
BD6886GUL, BD6369GUL I/O Truth Table
MODE
PS
INPUT
SEL
INA
INB
OUTPUT
OUTA OUTB
OUTPUT MODE
L
X
Z※7
Z※7
Standby
EN/IN
L
H
L
H
L
Forward rotation
H
H
L
H
Reverse rotation
H
L
L
L
L
Brake
IN/IN
H
L
H
H
L
L
H
H
Reverse rotation
L
Forward rotation
H
H
Z※8
Z※8
Standby
-
L
X
X
X
Z※8
Z※8
Standby
L: Low, H: High, X: Don’t care, Z: Hi impedance
At forward rotation, current flows from OUTA to OUTB. At reverse rotation, current flows from OUTB to OUTA.
※8Z at the Constant-Voltage driver output L voltage for connect feedback resistance (20kΩ Typ.) for output H voltage setting between OUT pin and GND.
But output Power MOS is OFF condition.
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
12/16
2012.03 - Rev.A