AP4830 Ver la hoja de datos (PDF) - Unspecified
Número de pieza
componentes Descripción
Fabricante
AP4830 Datasheet PDF : 3 Pages
| |||
SPECIFICATIONS
Output Impedance Voltage Output: <10Ω
Current Output: >100KΩ
Output Drive
Voltage Output: 10mA,
max. (1KΩ, min. @ 10V)
Current Output: 15V compliance @ 20mA (750Ω , max)
Stability (15-minute
warm up)
±0.05%/°C, typical
Ramp Rate Range
100:1, min.
Repeatability
Within 1% of previous ramp or setpoint setting
Reference Supply
Supply: 5VDC ±5%
Setpoint Status
Temperature Range
Power
Weight
Stability: <0.003%/°C
Loading: 10mA, max.
Open-collector, referenced to common. TTL compatible,
20mA sink, max
Operating: 0 to 60°C (32 to 140°F)
Storage: -20 to 85°C (-4 to 185°F)
Consumption: 3W typical, 5W max
Standard: 120VAC (±10%, 50-400Hz)
Available: 240VAC (±10%, 50-400Hz)
0.58lbs
DIMENSIONS
Dimensions are in mm (inches)
Retaining Spring
Available: Model M801
MODELS & ACCESSORIES
Mounting
All Action Paks feature plug-in installation. Model
AP4830 uses a 20-pin base (M020).
Ordering Information
Specify:
1. Model: AP4830
2. Output Range (see Tables 2, 3)
3. Option: U (see text)
Pin Connections
1 AC Power (Hot)
2 Shield (Gnd)
3 AC Power (Neu)
5 Setpoint Status (TTL)
6 SETPOINT Control (+)
7 Timing Capacitor (+)
9 Timing Capacitor (-)
10 Ramp Rate Control (+)
11 +5V Reference
Eurotherm, Inc.
Action Instruments; www.eurotherm.com/actionio
741-F Miller Drive, Leesburg, VA 20175
Phone: 703-443-0000 FAX: 703-669-1300
721-0475-00-E
1/08
M020
12 Reference Common (-)
13 Reset (contact)
15 Reset (+5V/contact)
17 Output (+)
19 Output (-)
Note: To reset, momentarily short pins 13 and 15 or apply
+5V to pin 15. Pins 4,8,14,16,18,20 are “No Connection”
and may be used for spare termination.
Share Link: 