Hi3516 Full-HD IP Camera SoC
Key Specifications
Processor
● ARM Cortex A9
− Up to 800 MHz
− 32 KB L1 I-cache, 32 KB L1 D-cache
− 256 KB L2 cache
Video Encoding
● H.264 baseline profile
● H.264 main profile
● H.264 high profile
● MPEG4 SP
● MJPEG/JPEG baseline
Video Encoding Performance
● 16-megapixel maximum resolution for H.264
encoding
● Real-time H.264&JPEG encoding of multiple
types of streams:
− 1080p@30 fps+D1@30 fps+CIF@30
fps+QVGA@30 fps+1080p JPEG snapshot
1 fps
− 720p@60 fps+D1@30 fps+CIF@30
fps+QVGA@30 fps+720p JPEG snapshot
1 fps
● JPEG snapshot of 3-megapixel@15 fps to
16-megapixel @2 fps
● MPEG4 SP encoding, a maximum of 960H
resolution
● CBR, VBR, and ABR, ranging from 16 kbit/s
to 40 Mbit/s
● Encoding frame rate, ranging from 1/16
frame/s to 60 frame/s
● ROI
● Color-to-gray
Intelligent Video Analysis
● Integrated intelligent analysis acceleration
engine, supporting motion detection,
boundary guard, face detection, and video
diagnosis
Video and Graphic Processing
● De-interlace pre-processing, image
enhancement, edge enhancement, and 3D
denoise
● Anti-flicker processing for output videos and
graphics
● 1/16x to 8x video scaling
● 1/24x to 42x image scaling
● OSD overlay pre-processing for eight areas
during encoding
● Hardware graphics overlay post-processing
for the videos at two layers (video layer and
graphics layer 1)
ISP
● Adjustable 3A function
● WDR, highlight compensation, backlight
compensation, gamma correction, and color
enhancement
● Defect pixel correction, denoise, and digital
image stabilizer
● ISP APIs for adjusting the ISP effect
● PC sensor and ISP tuning tools
Audio Codec
● Voice codec in compliance with multiple
protocols by using software
● G.711, ADPCM, and G.726 encoding
● Echo cancellation
Security Engine
● AES, DES, and 3DES encryption and
decryption algorithms by using hardware
● Digital watermark
Video Interfaces
● Input
− 8-/10-/12-/14-/16-bit RGB Bayer input, a
maximum of 150 MHz clock frequency
− BT.601
− BT.656
− BT.1120, supporting the embedded
synchronization and external synchroniza-
tion modes
− Compatibility with mainstream CMOSs
provided by SONY, Aptina, OV, and
Altasens
− Compatibility with HD CCDs provided by
Sharp and Panasonic
− Compatibility with the 960H CCD sensor
− Video inputs of 16-megapixel@2 fps,
5-megapixel@5 fps, 3-megapixel@15 fps,
1080p@30 fps or 720p@60 fps
− Two input interfaces. Only one has the ISP
function, and dual-sensor inputs are
supported.
● Output
− 1-channel CVBS output and one BT.656
output interface
− One BT.1120 VO interface for connecting
to the external HDMI or SDI interface,
1080p@30 fps
Audio Interfaces
● I2Sx2
● Integrated audio codecx1, 8- or 16-bit voice
inputs and outputs
● Connection to the external audio codec, 8-
or 16-bit voice inputs and outputs
Peripheral Interfaces
● UARTx4
● IRx1, I2Cx1, SPIx1 (master/slave mode),
GPIOs, and PWMx6
● PCIe 1.1x1, EP and RC
● SDIO 2.0x2, maximum capacity of 32 GB
● USB 2.0 Hostx2, hub
● GMACx1, supporting RGMII and MII modes,
10 Mbit/s or 100 Mbit/s full-duplex or
half-duplex mode, and 1000 Mbit/s
full-duplex mode
External Memory Interfaces
● DDR2 or DDR3 SDRAM
− 32-/16-bit DDR2/DDR3@500 MHz
− Maximum capacity of 1 GB
● SPI/NOR flash
− 1-, 2-, or 4-bit SPI/NOR flash
● NAND flash
− 8 bits
− SLC, MLC, and 1-, 4-, 8-, or 24-bit ECC
− Components with 8 GB capacity or larger
● NOR flash or NAND flash boot mode
SDK
● SDK based on Linux 2.6.35
● High-performance H.264 PC decoding library
Physical Specifications
● Power consumption
− Typical power of 1200 mW
− Multiple-level power-saving mode
● Operating voltage
− 1.0 V core voltage
− 3.3 V I/O voltage, 2.5 V PCIE voltage, and
5 V tolerance voltage
− 1.5 V or 1.8 V DDR2/DDR3 SDRAM
voltage
● Ambient temperature
– 20°C (–4°F ) to +70°C (+158°F)
● Package
– 416-pin FC-CSP
● 0.65 mm ball pitch and 15 mm x 15 mm
body size