SBSPP0500683MXT Ver la hoja de datos (PDF) - Unspecified
Número de pieza
componentes Descripción
Fabricante
SBSPP0500683MXT Datasheet PDF : 4 Pages
| |||
SBSP
Surface Mount EMI Filters
1206
L
3.2 ± 0.3
(0.126 ± 0.012)
W
1.6 ± 0.3
(0.063 ± 0.012)
T
1.6 ± 0.2
(0.063 ± 0.008)
B1
0.95 ± 0.3
(0.037 ± 0.012)
B2
0.5 ± 0.25
(0.02 ± 0.01)
Type
Chip Size
Max Current
Rated
Voltage
Dielectric
25Vdc
50Vdc
100Vdc
C0G/NP0
X7R
C0G/NP0
X7R
C0G/NP0
X7R
SBSPP
1206
1A
Minimum and
maximum
capacitance
values
-
100nF-150nF
-
22nF-68nF
22pF-470pF
1nF-15nF
Effects of mounting method on insertion loss
C and Pi filters are mounted to PCBs and soldered in identical manner to chip capacitors. Solder connections made to each end (signal lines) and
each side band (earth track).
Whilst SBSG, SBSM and SBSP filters can be mounted conventionally on PCBs, they are also suitable for mounting in a wall or partition on a board.
This greatly improves the screening between filter input and output, thereby enhancing the high frequency response.
The following insertion loss curves (for SBSP, SBSG, SBSM Pi filters), based on actual measurements, show the effect. It can be seen that the filters
conventionally mounted (Fig. 1) exhibit a drop in attenuation at higher frequencies. Improved shielding methods (Fig. 2), maintain excellent
suppression characteristics to 1GHz and above. See below for application example.
© Knowles 2014
SBSPDatasheet Issue 4 (P109792) Release Date 04/11/14 Page 1 of 3
Tel: +44 1603 723300 | Email SyferSales@knowles.com | www.knowlescapacitors.com/syfer
Share Link: 