20020000-C022B01LF Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

20020000-C022B01LF

Terminal block- Plug and Socket, Fixed Plug

Unspecified 

NUMBER

GS-12-625

TYPE

Product Specification

TITLE

Terminal block- Plug and Socket, Fixed Plug

PAGE

REVISION

5 of 8

D

AUTHORIZED BY

Jason Hsu

DATE

Nov. 11th, 2009

CLASSIFICATION

Unrestricted

3.5.3.5

Fire Test

(Glow wire test)

Samples were measured after salt is removed by running

water.

Specimens with no visible flame and no sustained

glowing; or flames and glowing on the specimen

extinguished 30 seconds after the removal of the glow

wire.

IEC 60695-2-10,-2-11,-2-12

Apply the glow-wire once for

no longer than 5 seconds.

4.0 QUALITY ASSUREANCE PROVISIONS

4.1 Equipment Calibration

All test equipment and inspection facilities used in the performance of any test shall be maintained

in a calibration system in accordance with QS9000.

4.2 Inspection Conditions

Unless otherwise specified, all inspections shall be performed under the following conditions:

a) Temperature: 25+/- 5℃

b) Relative Humidity: 30% to 60%

c) Barometric Pressure: Local ambient

4.3 Acceptance

4.3.1 Electrical and Mechanical requirements shall be as indicated in Paragraphs 3.5 using test

data and appropriate statistical techniques.

4.3.2 Failures attributed to equipment, test setup or operator error shall not disqualify the

product.

4.4 Qualification Testing

Qualification testing shall be performed on sample units predicted with equipment and procedures

normally used in production. Test sequence are shown in Table 1(Pluggable plug), Table

2(pluggable socket), and Table3(Fixed plug).

PDS: Rev :E

STATUS:Released

Printed: Mar 05, 2012

This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI. No part of the information shown on the document may be used in any way or

disclosed to others without the written consent of FCI. Copyright FCI.

Form E-3005

Rev F

GS-01-001

Share Link: