XP3A-5866-0725D-S/S Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

XP3A-5866-0725D-S/S

Probe Pin

Unspecified 

Precautions

■ Correct Use

General Environmental Conditions

Use the Probe Pins at an ambient operating temperature of

-25 to 85°C and a humidity of 30%.

Use the Probe Pins in an ambient atmosphere that does not contain

dust, dirt, corrosive gas or oil so that the Probe Pins do not become

contaminated.

Stroke Conditions

Apply a load to the Probe Pins only in the axial direction.

Never apply a lateral load.

The life of the Probe Pins will be drastically reduced if the

recommended stroke is exceeded.

Current Application Conditions.

Apply a current when the Probe Pins are stationary after they have

come into contact with the target at the recommended stroke posi-

tion.

If a current is applied during the stroke, at a position other then the

recommended stroke, or when the Probe Pins are not in contact with

the target, the life of the Probe Pins will be drastically reduced.

The catalog value of the carrying capacity may not be met due to

Probe Pin deterioration or other factors. Allow sufficient leeway when

you design the actual application.

Voltage Application Conditions

Apply a voltage when the Probe Pins are stationary after they have

come into contact with the target at the recommended stroke posi-

tion.

Do not apply a voltage when the Probe Pins are not in contact with

the target. The Probe Pins will be damaged due to discharge imme-

diately before they come into contact.

When a high voltage is applied to the contact probe, strictly observe

the current and voltage application conditions. Also, take measures

to prevent discharge or other large instantaneous current.

Carrying Capacity

The rated current that is given in the catalogs is the maximum contin-

uous current for 1 minute under the above conditions (general envi-

ronment, stroke, current application and voltage application.

Resistance

If a large current is applied, the resistance may increase due to dete-

rioration of the contacts and internal components.

As the number of strokes increases, the resistance may increase due

to deterioration of the contacts and internal components.

Durability

The durability specification that is given in the catalog is a guideline

for the number of times that the Probe Pins can be used without

problems at 10 mA.

Depending on the operating environment and conditions, the Probe

Pins may need to be replaced sooner than given in the specifications

due to increased resistance, reduced contact force or other factors.

Replace the Probe Pins as required by the actual application.

Contact Force

The contact force of the Probe Pins will be reduced at a temperature

of 85°C or higher.

If the current is increased, heat generated by the Probe Pins will

reduce the contact force.

Recommended Mounting Hold Dimensions

The dimensions are reference values. Actual values will depend on

the material and thickness of the resin plate.

Probe Pin XP3A

7

Share Link: