TES1-0511(2008) Ver la hoja de datos (PDF) - TRACO Electronic AG

Número de pieza

componentes Descripción

Fabricante

TES1-0511
(Rev.:2008)

DC/DC Converters

TRACO Electronic AG 

DC/DC Converters

TES 1 Series

1 Watt

Input Specifications

Input current no load / full load

5 Vin models: 30 mA / 260 mA typ.

12 Vin models: 15 mA / 110 mA typ.

24 Vin models: 8 mA / 55 mA typ.

Surge voltage (1 sec. max.)

5 Vin models: 9 V max.

12 Vin models: 18 V max.

24 Vin models: 30 V max.

Reverse voltage protection 0.3 A max.

Input filter internal capacitors

Output Specifications

Voltage set accuracy

– 5VDC models: ±2 % at 60 % load

– other models: ±2 % at 100 % load

Voltage balance (dual output models, balanced load) ±1 % max.

Regulation

– Input variation 1.2 % / 1 % change Vin

– Load variation see graphs below

Ripple and noise (20 MHz Bandwidth) 120 mVpp max.

Temperature coefficient ±0.02 %/K

Short circuit protection limited 0.5 sec. max.

Capacitive load

33 µF max.

General Specifications

Temperature ranges

– Operating –40 °C to +85 °C

– Storage –55 °C to +125 °C

– Case –105 °C max.

Derating (convection cooling) 3.3 %/K above 75°C

Humidity (non condensing) 95 % rel. H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at 25°C, ground benign) >2’000’000 h

Isolation voltage (60sec) – Input/Output 1‘500 VDC

Isolation capacity

– Input/Output 40 pF typ.

Isolation resistance

– Input/Output >1‘000 Mohm

Switching frequency 100 kHz typ. (frequency modulation)

Frequency change over line and load ± 30 %

Output voltage variation dependent on load (at nominal input voltage)

5 VDC models:

+10%

other models:

+10%

0%

-10%

0

50%

Load

max.

typ.

min.

100%

0%

-10%

0

50%

Load

max.

typ.

min.

100%

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com

Page 2 of 3

Share Link: