MAX4760ETX(2007) Ver la hoja de datos (PDF) - Maxim Integrated
Número de pieza
componentes Descripción
Fabricante
MAX4760ETX Datasheet PDF : 14 Pages
| |||
High-Bandwidth, Quad DPDT Switches
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND.)
V+, IN_, EN...............................................................-0.3V to +6V
COM_, NO_, NC_ (Note 1) ...........................-0.3V to (V+ + 0.3V)
Continuous Current
NO_, NC_, COM_ .......................................................±100mA
Peak Current
(pulsed at 1ms, 10% duty cycle)................................±200mA
(pulsed at 1ms, 50% duty cycle)............................... ±300mA
Continuous Power Dissipation (TA = +70°C)
36-Bump UCSP (derate 15.3mW/°C above +70°C).... 1221mW
36-Pin Thin QFN (derate 26.3mW/°C above +70°C)... 2105mW
ESD per Method 3015.7.......................................................±2kV
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) ................................ +300°C
Bump Temperature (soldering)
Infrared (15s) ...............................................................+220°C
Vapor Phase (60s) .......................................................+215°C
Note 1: Signals on NO_, NC_, COM_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maximum
current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V+ = +2.7V to +5.25V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at V+ = 3V, TA = +25°C.) (Notes 2, 3)
PARAMETER
ANALOG SWITCH
Analog Signal Range
On-Resistance (Note 4)
On-Resistance Match
Between Channels
(Notes 4, 5)
On-Resistance Flatness
(Note 6)
NO_, NC_ Off-Leakage
Current
COM_ Off-Leakage Current
COM_ On-Leakage Current
DYNAMIC
Turn-On Time
Turn-Off Time
SYMBOL
CONDITIONS
TA
MIN TYP MAX UNITS
VCOM_,
VNO_,
V
RON
V+ = 2.7V, ICOM_ = 10mA,
VNC_ or VNO_ = 0V or V+
TMIN to TMAX 0
V+
V
+25°C
TMIN to TMAX
2.0 3.5
Ω
4
ΔRON
V+ = 2.7V, ICOM_ = 10mA,
VNO_ or VNC_ = 1.5V
+25°C
TMIN to TMAX
0.2 0.4
Ω
0.55
RFLAT(ON)
V+ = 2.7V, ICOM_=10mA,
VNC_ or VNO_ = 0V or V+
+25°C
TMIN to TMAX
0.8 1.5
Ω
1.8
INO_(OFF),
INC_(OFF)
V+ = 3.6V;
VCOM_ = 3.3V, 0.3V;
VNO_ or VNC_ = 0.3V, 3.3V
+25°C
-5
TMIN to TMAX -25
+5
nA
+25
V+ = 3.6V (MAX4761); VCOM_ = 3.3V,
+25°C
-5
0.3V; VNO_ or VNC_ = 0.3V, 3.3V
TMIN to TMAX -25
0.01 +5
+25
nA
ICOM_(ON)
V+ = 3.6V; VCOM_ = 3.3V, 0.3V;
VNO_ or VNC_ = 3.3V, 0.3V or floating
+25°C
TMIN to TMAX
-5
-25
+5
nA
+25
tON
VNO_ or VNC_ = 1.5V;
RL = 50Ω; CL = 35pF, Figure 2
tOFF
V+ = 2.7V, VNO_ or VNC_ = 1.5V;
RL = 50Ω; CL = 35pF, Figure 2
+25°C
TMIN to TMAX
+25°C
TMIN to TMAX
45 140
ns
150
25 50
ns
60
2 _______________________________________________________________________________________
Share Link: 