CDB5341 Ver la hoja de datos (PDF) - Cirrus Logic

Número de pieza

componentes Descripción

Fabricante

CDB5341

Evaluation Board for CS5341

Cirrus Logic 

CDB5341

1. CDB5341 SYSTEM OVERVIEW

The CDB5341 evaluation board is an excellent means of quickly evaluating the CS5341. The

CS8406 digital audio interface transmitter provides an easy interface to digital audio signal ana-

lyzers including the majority of digital audio test equipment.

The CDB5341 schematic has been partitioned into 5 schematics shown in Figure 2 through

Figure 6. Each partitioned schematic is represented in the system diagram shown in Figure 1.

Notice that the system diagram also includes the interconnections between the

partitioned schematics.

2. CS8406 DIGITAL AUDIO TRANSMITTER

The system generates and encodes standard S/PDIF data using a CS8406 Digital Audio Trans-

mitter (see Figure 5). The outputs of the CS8406 are RS422 compatible differential line drivers.

The CS8406 supports both Left Justified and I2S data formats, as determined by the DIP switch,

S2. A description of the CS8406 is included in the CS8406 datasheet.

3. INPUT/OUTPUT FOR CLOCKS AND DATA

The evaluation board has been designed to allow interfacing to external systems via the 10-pin

header, J11. The schematic for the clock/data input/output is shown in Figure 4.

The CDB5341 allows some flexibility as to the generation of the clocks. When the CS5341 and

CS8406 are in slave mode, the SCLK and LRCK must be provided via the header, J11. MCLK

can be generated from the on-board oscillator, Y1 or provided via the header, J11 as determined

by the DIP switch, S2. The on-board oscillator is socketed to allow other frequency oscillators to

be used. Please note that the on-board oscillator must be removed if an external MCLK is pro-

vided through header J11.

4. POWER SUPPLY CIRCUITRY

Power is supplied to the evaluation board by four binding posts (VA/VD, VL, GND, +5V),

see Figure 6. The VA/VD input supplies the VA and VD pins of the CS5341. VL supplies power

to the VL pin of the CS5341 and to the level shifter circuits. The +5V input supplies power to the

digital circuitry and the input amplifiers.

5. GROUNDING AND POWER SUPPLY DECOUPLING

The CS5341 requires careful attention to power supply and grounding arrangements to optimize

performance. Figure 3 details the power distribution used on this board. The decoupling capac-

itors are located as close to the CS5341 as possible. Extensive use of ground plane fill in the

evaluation board yields large reductions in radiated noise.

6. ANALOG INPUT FILTER

The CDB5341 implements a single-ended analog input buffer, as shown in Figure 2. Note that

there is no attenuation or gain associated with the input buffer.

DS564DB1

3

Share Link: