ATASTK512-EK2-AUT Ver la hoja de datos (PDF) - Atmel Corporation

Número de pieza

componentes Descripción

Fabricante

ATASTK512-EK2-AUT

AVR-based Uni-directional Radio Starter Kit Featuring Secure Rolling-Code RF Transmission Encryption User Guide

Atmel Corporation 

Getting Started

1. Carefully remove any ICs in the green “SCKT3200A2” socket.

2. Insert the furnished ATMega88 into the “SCKT3200A2” socket.

Note: The orientation of the red stripe in the cable is not critical in the following steps as long as pin 1 is con-

nected to pin 1.

3. Using a 6-pin jumper cable supplied with the STK500;

connect the two male headers “ISP6PIN” and “SPROG2”.

4. Using a 10-pin jumper cable supplied with the STK500;

connect the two male headers “PORTC” and “LEDS”.

5. Using a 10-pin jumper cable supplied with the STK500;

connect the two male headers “PORTD” and “SWITCHES”.

6. Place jumpers on the following headers as shown in Figure 2-2.

– VTARGET

– AREF

– RESET

– XTAL1

– OSCEL (a 3-pin header. Place a jumper next to the “1” printed on the board).

Figure 2-2. Detail of Jumper Placement on the STK500

2-2

5170C–AVR–10/09

STK512 User Guide

Share Link: