PCA9617A Ver la hoja de datos (PDF) - ON Semiconductor
Número de pieza
componentes Descripción
Fabricante
PCA9617A Datasheet PDF : 15 Pages
| |||
PCA9617A
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
VCC(B)
VCC(A)
VI/O
II/O
II
ICC(A),
ICC(B)
IGND
TSTG
TL
TJ
qJA
PD
MSL
Supply Voltage Port B
Supply Voltage Port A (Adjustable)
Input/Output Pin Voltage Port A, Port B, EN
Input/Output Current Port A, Port B
Input Current EN
DC Supply Current
DC Ground Current
Storage Temperature Range
Lead Temperature, 1 mm from Case for 10 Seconds
Junction Temperature Under Bias
Thermal Resistance Micro8 (Note 1)
Power Dissipation in Still Air at 85°C Micro8
Moisture Sensitivity
−0.5 to +7.0
−0.5 to +7.0
−0.5 to +7.0
50
50
±100
±100
−65 to +150
260
150
205
609
Level 1
V
V
V
mA
mA
mA
mA
°C
°C
°C
°C/W
mW
FR
VESD
Flammability Rating Oxygen Index: 28 to 34
ESD Withstand Voltage Human Body Mode (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
UL 94 V−0 @ 0.125 in
> 8000
V
> 800
> 2000
ILATCHUP Latchup Performance Above VCC and Below GND at 125°C (Note 5)
±100
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm by 1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA / JESD22−A114−A.
3. Tested to EIA / JESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA / JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Max
Unit
VCC(B)
VCC(A)
(Note 6)
Supply Voltage Port B
Supply Voltage Port A
2.2
5.5
V
0.8
5.5
V
VI/O
Input/Output Pin Voltage
0
5.5
V
TA
Operating Free−Air Temperature
−55
+125
°C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
6. For part to function, 0.4 x VCC(A) must be equal to or less than VCC(B) − 0.8 V. The voltage on the A port can still be up to 5.5 V without damage
to the pins.
http://onsemi.com
8
Share Link: 