HCPL-0452 Ver la hoja de datos (PDF) - HP => Agilent Technologies
Número de pieza
componentes Descripción
Fabricante
HCPL-0452 Datasheet PDF : 16 Pages
| |||
2
These single channel optocoup-
lers are available in 8-Pin DIP,
SO-8 and Widebody package
configurations.
The 6N135, HCPL-0500, and
HCNW135 are for use in TTL/
CMOS, TTL/LSTTL or wide
bandwidth analog applications.
Current transfer ratio (CTR) for
these devices is 7% minimum at
IF = 16 mA.
The 6N136, HCPL-2502,
HCPL-0501, and HCNW136 are
designed for high speed TTL/TTL
applications. A standard 16 mA
TTL sink current through the
input LED will provide enough
output current for 1 TTL load and
a 5.6 kΩ pull-up resistor. CTR for
these devices is 19% minimum at
IF = 16 mA.
The HCPL-4502, HCPL-0452,
and HCNW4502 provide the
electrical and switching
performance of the 6N136,
HCPL-0501, and HCNW136 with
increased ESD protection.
The HCPL-4503, HCPL-0453,
and HCNW4503 are similar to the
HCPL-4502, HCPL-0452, and
HCNW4502 optocouplers but
have increased common mode
transient immunity of 15 kV/µs
minimum at VCM = 1500 V
guaranteed.
Schematic
ICC 8
VCC
2 IF
ANODE
+
VF
IO
–
CATHODE
3
SHIELD
HCPL-4503/0453
HCNW4503
IB
7*
VB
* NOTE: FOR HCPL-4502/-3, HCPL-0452/3,
HCNW4502/3, PIN 7 IS NOT CONNECTED.
6
VO
5
GND
Selection Guide
Minimum CMR
8-Pin DIP (300 Mil)
Small-Outline SO-8
Widebody
(400 Mil)
Hermetic
dV/dt
(V/µs)
Current
VCM Transfer
(V) Ratio (%)
Single
Channel
Package
Dual
Channel
Package*
Single
Channel
Package
Dual
Channel
Package*
Single
Channel
Package
Single and
Dual Channel
Packages*
1,000 10
7
6N135 HCPL-2530 HCPL-0500 HCPL-0530 HCNW135
19
6N136 HCPL-2531 HCPL-0501 HCPL-0531 HCNW136
HCPL-4502†
HCPL-0452†
HCNW4502†
15
HCPL-2502
15,000 1500
19
HCPL-4503† HCPL-4534 HCPL-0453† HCPL-0534 HCNW4503†
1,000 10
9
HCPL-55XX
HCPL-65XX
4N55
*Technical data for these products are on separate Agilent publications.
†Pin 7, transistor base, is not connected.
Ordering Information
Specify Part Number followed by Option Number (if desired).
Example:
HCPL-4503#XXXX
020 = UL 5000 V rms/1 Minute Option*
060 = IEC/EN/DIN EN 60747-5-2 VIORM = 630 V peak Option**
300 = Gull Wing Surface Mount Option†
500 = Tape and Reel Packaging Option
XXXE = Lead Free Option
Option data sheets available. Contact your Agilent sales representative or authorized distributor for information.
*For 6N135/6 and HCPL-4502/3 only.
**For HCPL-4503 only. Combination of Option 020 and Option 060 is not available.
†Gull wing surface mount option applies to through hole parts only.
Remarks: The notation “#” is used for existing products, while (new) products launched since 15th July
2001 and lead free option will use “-”
Share Link: 