MKP1840433635 Ver la hoja de datos (PDF) - Vishay Semiconductors

Número de pieza

componentes Descripción

Fabricante

MKP1840433635

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type

Vishay Semiconductors 

Not Recommended for New Designs, Use MKP385

www.vishay.com

MKP1840

Vishay Roederstein

AC and Pulse Metallized Polypropylene Film Capacitors

MKP Radial Potted Type

FEATURES

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

APPLICATIONS

• Pulse operations

• SMPS and thyristor circuits

• Storage, filter, timing, sample and hold circuits

QUICK REFERENCE DATA

Capacitance range

4700 pF to 10 μF

Capacitance tolerances

± 20 % (M), ± 10 % (K), ± 5 % (J)

Climatic testing class according to IEC 60068

55/100/56

Operating temperature range

-55 °C to +100 °C

Dielectric

Polypropylene film

Electrodes

Metallized

Construction

Extended metallized film

(refer to general information following the link in note below table)

Coating

Flame retardant plastic case, epoxy resin sealed

UL-class 94 V-0

Leads

Tinned wire

Rated voltages (UR)

Insulation resistance

Permissible AC voltages (RMS) up to 60 Hz

Test voltage (electrode/electrode)

Time constant

Temperature coefficient

100 VDC, 160 VDC, 250 VDC, 400 VDC, 630 VDC

Measured at 100 VDC after one minute

For C  0.33 μF:

25 000 M (UR 100 VDC)

63 VAC, 100 VAC, 160 VAC, 220 VAC, 250 VAC

1.6 x UR for 2 s

Measured at 100 VDC after one minute

For C > 0.33 μF:

30 000 s minimum value

-250 x 10-6/°C (typical value)

Capacitance drift

Up to +40 °C, < 0.5 % for a period of two years

Dielectric absorption

0.05 % (typical value) according to IEC 60068-2-21

Derating for DC and AC category voltage UC

Self inductance

At +85 °C: UC = 1.0 UR

At +100 °C: UC = 0.7 UR

~ 6 nH measured with 2 mm long leads

Pull test on leads

30 N in direction of leads according to IEC 60068-2-21

Note

• For further details, please refer to the general information available at www.vishay.com/doc?26033

Revision: 13-Oct-14

1

Document Number: 26061

For technical questions, contact: dc-film@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: