HFBR-2115TZ Ver la hoja de datos (PDF) - Avago Technologies

Número de pieza

componentes Descripción

Fabricante

HFBR-2115TZ

Fiber Optic Transmitter and Receiver Data Links for 125 MBd

Avago Technologies 

Board Layout – Hole Pattern

The Avago transmitter and receiver hole pattern is com-

patible with other data link modules from other vendors.

The drawing shown in Figure 8 can be used as a guide in

the mechanical layout of your circuit board.

Regulatory Compliance

These data link modules are intended to enable com-

mercial system designers to develop equipment that

complies with the various international regulations

governing certification of Information Technology Equip-

ment. Additional information is available from your Avago

sales representative.

All HFBR-1115TZ LED transmitters are classified as

IEC-825-1 Accessible Emission Limit (AEL) Class 1 based

upon the current proposed draft scheduled to go into

effect on January 1, 1997. AEL Class 1 LED devices are con-

sidered eye safe. See Application Note 1094, LED Device

Classifications with Respect to AEL Values as Defined in the

IEC 825-1 Standard and the European EN60825-1 Directive.

The material used for the housing in the HFBR-1115TZ/-

2115TZ series is Ultem 2100 (GE). Ultem 2100 is recog-

nized for a UL flammability rating of 94V-0 (UL File Number

E121562) and the CSA (Canadian Standards Association)

equivalent (File Number LS88480).

(16X)

ø.003.82

±

±

0.1

.004

–A–

Ø 0.000 M A

17.78

.700

7.62

.300

Figure 8. Recommended board layout hole pattern.

(7X)

2.54

.100

TOP VIEW

UNITS = mm/INCH

6

Share Link: