AT89STK-06 Ver la hoja de datos (PDF) - Atmel Corporation

Número de pieza

componentes Descripción

Fabricante

AT89STK-06

AT89STK-06 Demo Board Hardware User Guide

Atmel Corporation 

Section 1

Introduction

1.1 Features

This document describes the board included in the AT89STK-06 Starter Kit dedicated to

the T89C51CC01/CC02 and AT89C51CC03 CAN microcontrollers (for T89C51CC02

optionnal adaptor is required). This board is designed to allow an easy evaluation of the

product using demonstration software.

The AT89STK-06 Starter Kit can be used with the AT89C51AC3, TR89C51AC2, and

T89C5115 Flash Microcontrollers with ADC (for T89C5115 optional adapter is required).

• CAN

– On board CAN transceiver Atmel ATA6660

– D-sub Connector Compliant to the CiA (User Group: "CAN in Automation")

Recommendation for the CAN High Speed Bus

• Two Different Sockets to Support AT89C51CC03 and AT89C51AC3 in PLCC52 and all

controllers in PLCC44 Packages

• Support of the T89C51CC02 & T89C5115 Microcontroller Requires the use of a PLCC28

Adapter (CANADAPT28).

• The Board Comes with a AT89C51CC03-UA (PLCC44 package) and a AT89C51CC03-CA

(PLCC52 package) Samples(1).

• Analog-to-Digital Converter

– Potentiometer

– Thermal Resistor

– On board ADC Reference Voltage

• On-board Reset, INT0, INT1, LEDs, EA, ISP and Programming Interface

• Power, ALE, RS232 Rx and Tx LEDs

• CAN, SPI and RS232 Hardware Connectors

• On-board Voltage Regulator

• Voltage Operation: 8V to 15V

• Operating Temperature Range: 0 to +70°C

• Dimension: 80 mm x 100 mm

Notes: 1. Samples for AT89C51AC3, T89C51CC01, T89C51AC2, T89C51CC02, and

T89C5115 can be ordered separately

AT89STK-06 Demo Board Software Demonstration Guide

1-1

Rev. 4339C–CAN–07/05

Share Link: