EVAL-AD5755-1SDZ Ver la hoja de datos (PDF) - Analog Devices

Número de pieza

componentes Descripción

Fabricante

EVAL-AD5755-1SDZ

Evaluation Board User Guide

Analog Devices 

Evaluation Board User Guide

EVALUATION BOARD SOFTWARE

SOFTWARE INSTALLATION

The EVAL-AD575xSDZ evaluation kit includes self-installing

software on a CD. The software is compatible with Windows XP

(SP2) and Windows Vista (32-bit or 64-bit), and Windows 7 (32-bit

or 64-bit). If the setup file does not run automatically, you can run

setup.exe from the CD.

Install the evaluation software before connecting the evaluation

board and SDP board to the USB port of the PC to ensure that

the evaluation system is correctly recognized when connected

to the PC.

1. After installation from the CD is complete, power up the

EVAL-AD575xSDZ as described in the Power Supplies

section.

2. Next, connect the SDP board to the EVAL-AD575xSDZ

and then to the USB port of your PC using the supplied cable.

3. When the evaluation system is detected, proceed through

any dialog boxes that appear. This finishes the installation.

SOFTWARE OPERATION

To launch the software, complete the following steps:

1. From the Start menu, select Analog Devices –AD5755

AD5757 AD5755-1, and then select AD5755 AD5757

UG-244

AD5755-1 Evaluation Software. The main window of the

software opens (see Figure 5).

2. If the evaluation system is not connected to the USB port

when the software is launched, a connectivity error is

displayed (see Figure 4). Simply connect the evaluation

board to the USB port of the PC, wait a number of seconds,

and click Rescan. Follow the instructions.

Figure 4. Connectivity Error Alert

Figure 5. Main Window

Rev. B | Page 5 of 16

Share Link: