UPC2711TB-EVAL Ver la hoja de datos (PDF) - California Eastern Laboratories.
Número de pieza
componentes Descripción
Fabricante
UPC2711TB-EVAL Datasheet PDF : 10 Pages
| |||
ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
SYMBOLS
PARAMETERS
UNITS RATINGS
VCC Supply Voltage
V
6
PIN
Input Power
dBm
+10
PT
Total Power Dissipation2
mW
200
TOP Operating Temperature
°C
-45 to +85
TSTG Storage Temperature
°C -55 to +150
Notes:
1. Operation in excess of any one of these parameters may result
in permanent damage.
2. Mounted on double sided copper clad 50 x 50 x 1.6 mm epoxy
glass PWB (TA = +85°C).
UPC2711TB, UPC2712TB
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
UNITS MIN TYP MAX
VCC Supply Voltage
V 4.5 5.0 5.5
TOP Operating Temperature ˚C -40 +25 +85
PIN DESCRIPTION
Pin
Pin
No.
Name
1
Input
Applied
Voltage
(V)
4
Output
6
VCC
4.5 to 5.5
2
GND
0
3
5
Description
Internal Equivalent Circuit
Signal input pin. An internal matching
circuit, configured with resistors, enables
6
50 Ω connection over a wide bandwidth.
A multi-feedback circuit is designed to
cancel the deviations of hFE and resistance.
4
This pin must be coupled to the signal source
with a blocking capacitor.
Signal output pin. An internal matching
circuit, configured with resistors, enables
50 Ω connection over a wide bandwidth.
This pin must be coupled to the output
load with a blocking capacitor.
1
Power supply pin. This pin should be
externally equipped with a bypass capacitor
to minimize ground impedance.
Ground pin. This pin should be connected
to system ground with minimum inductance.
Ground pattern on the board should be
2
formed as wide as possible. All the ground
3
pins must be connected together with wide
5
ground pattern to minimize impedance
difference.
Share Link: 