B32561J1105K189 Ver la hoja de datos (PDF) - TDK Corporation
Número de pieza
componentes Descripción
Fabricante
B32561J1105K189 Datasheet PDF : 32 Pages
| |||
Metallized polyester film capacitors (MKT)
General purpose (stacked) SilverCapTM
B32560 ... B32564
Typical applications
SMPS, converter
Electronic ballasts
Compact fluorescent lamps (CFL)
Ignition
Dimensional drawing
Climatic
Max. operating temperature: 125 °C
Climatic category (IEC 60068-1): 55/125/56
Features
Special dimensions available on request
High pulse strength
Small dimensions
Construction
Dielectric: polyethylene terephthalate
(polyester, PET)
Stacked-film technology
Uncoated
Terminals
Parallel wire leads, lead-free tinned
Special lead lengths available on request
Dimensions in mm
Lead spacing
±0.4
7.5
10.0
15.0
22.5
27.5
Lead diameter Type
d1
0.5
B32560
0.5
B32561
0.6
B32562J
0.8
B32562H
0.8
B32563
0.8
B32564
Marking
Rated capacitance (coded),
rated DC voltage
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel) for lead spacing ≤15.0 mm.
For notes on taping, refer to chapter "Taping and packing“.
Notes on mounting
When mounting these capacitors, take into account creepage distances and clearances to
adjacent live parts. The insulating strength of the cut surfaces to other live parts of the circuit is
1.5 times the capacitors rated DC voltage, but is always at least 300 V DC.
Capacitors with 7.5 mm lead spacing are only suitable for use with single-clad printed circuit
boards.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 32
Share Link: 