NAH-16-221 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

NAH-16-221

Ultra high-attenuation type of common mode noise from 10kHz to 1MHz

Unspecified 

NAH,NAC,NAM,NAP series

External view

As this product is adopted push-down type terminal block, this appearance is as follows.

1The terminal cover is retracted inside the unit.

2The screws for connecting the terminals are held in the up right position.

Standard Type

2-f4.8

[0.19]

Mounting Hole

Input

Terminal

92

[3.62]

82 ±0.5

[3.23]

77

[3.03]

Name Plate

2-Protection Earth

(2.5)

[0.1]

27

[1.06]

8

[0.31]

Output

Terminal

Input

Terminal

Terminal cover

6-M4

¶ Closed the terminal cover

Output

Terminal

Terminal cover

Mounting Plate

¶ Tolerance : ±1 [±0.04]

¶ Weight : 300g max

¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]

¶ Case : PBT

¶ Dimensions in mm, [ ]=inches

¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max

DIN rail installation Type

Input

Terminal

Input

Terminal

Terminal cover

6-M4

¶ Closed the terminal cover

92

[3.62]

77

[3.03]

(11)

[0.43]

2-Protection Earth

(2.5)

[0.1]

27

[1.06] 8

[0.31]

Name Plate

Output

Terminal

Output

Terminal

Terminal cover Mounting Plate

DIN rail

¶ Tolerance : ±1 [±0.04]

¶ Weight : 300g max

¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]

¶ Case : PBT

¶ Dimensions in mm, [ ]=inches

¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max

¡Note when installing the EMI/EMC

Filter on a DIN rail.

When the EMI/EMC Filter is grounded through

the DIN rail, the proper noise attenuation may not

be achieved.

Be sure to connect the protection earth (PE) of

the EMI/EMC Filter body to the earth.

It can connect the ground to either one only.

Name Plate

DIN rail

NA-5

Share Link: