FPF1007 Ver la hoja de datos (PDF) - Fairchild Semiconductor
Número de pieza
componentes Descripción
Fabricante
FPF1007 Datasheet PDF : 13 Pages
| |||
October 2012
FPF1007-FPF1009
IntelliMAX™ Advanced Load Products
Features
1.2 to 5.5 V Input Voltage Range
Typical RON = 30 mΩ at VIN = 5.5 V
Typical RON = 40 mΩ at VIN = 3.3 V
Fixed Three Different Turn-on Rise Time 10 µs / 80 µs / 1 ms
Low < 10 µA at VIN = 3.3 V Quiescent Current
Internal ON Pin Pull Down
Output Discharge Function
ESD Protection above 8000 V HBM and 2000 V CDM
RoHS Compliant
Applications
PDAs
Cell Phones
GPS Devices
MP3 Players
Digital Cameras
Peripheral Ports
Hot-Swap Supplies
Notebook Computers
General Description
The FPF1007/8/9 are low RDS P-Channel MOSFET load
switches offered in a selection of 10 µs, 80 µs, and 1 ms slew
rate turn-on options for transient / in-rush current control. To
support trends in mobile application requirements, the minimum
operating input voltage has been reduced down to 1.2 V, the
input current leakage has been minimized to extend battery life,
and the ESD-protection has been designed to withstand a
minimum of 8 kV (HBM) and 2 kV (CDM).
The switch is controlled by an active-high logic input (ON pin),
allowing direct interface with a low-voltage control signal. An
internal ON pin pull-down resistor protects against unintentional
device turn-on in the initial state. An on-chip pull-down resistor
on the output is enabled when the switch is turned-off and
provides quick, robust discharge of the output load.
BOTTOM
Pin 1
TOP
Ordering Information
Part
FPF1007
FPF1008
FPF1009
Switch RON at 5.5 V
[Typ.]
30 mΩ, PMOS
30 mΩ, PMOS
30 mΩ, PMOS
Rise Time
[Typ.]
10 µs
80 µs
1 ms
Output Discharge
[Typ.]
60 Ω
60 Ω
60 Ω
ON Pin
Activity
Active HIGH
Active HIGH
Active HIGH
© 2008 Fairchild Semiconductor Corporation
1
FPF1007-FPF1009 • Rev. 1.0.3
www.fairchildsemi.com
Share Link: 