74ABT827 Ver la hoja de datos (PDF) - NXP Semiconductors.
Número de pieza
componentes Descripción
Fabricante
74ABT827 Datasheet PDF : 14 Pages
| |||
NXP Semiconductors
74ABT827
10-bit buffer/line driver; non-inverting; 3-state
9. Static characteristics
Table 6. Static characteristics
Symbol Parameter
Conditions
VIK
VOH
VOL
II
IOFF
IO(pu/pd)
IOZ
ILO
IO
ICC
∆ICC
CI
CO
input clamping voltage
HIGH-level output
voltage
LOW-level output
voltage
input leakage current
power-off leakage
current
VCC = 4.5 V; IIK = −18 mA
VI = VIL or VIH
VCC = 4.5 V; IOH = −3 mA
VCC = 5.0 V; IOH = −3 mA
VCC = 4.5 V; IOH = −32 mA
VCC = 4.5 V; IOL = 64 mA;
VI = VIL or VIH
VCC = 5.5 V; VI = GND or 5.5 V
VCC = 0 V; VI or VO ≤ 4.5 V
power-up/power-down
output current
VCC = 2.0 V; VO = 0.5 V;
VI = GND or VCC; OEn HIGH
OFF-state output current VCC = 5.5 V; VI = VIL or VIH
VO = 2.7 V
VO = 0.5 V
output leakage current HIGH-state; VO = 5.5 V;
VCC = 5.5 V; VI = GND or VCC
output current
VCC = 5.5 V; VO = 2.5 V
supply current
VCC = 5.5 V; VI = GND or VCC
outputs HIGH-state
outputs LOW-state
outputs disabled
additional supply current per input pin; VCC = 5.5 V; one
input at 3.4 V; other inputs at
VCC or GND
outputs enabled
outputs 3-state, one data
input
outputs 3-state; one enable
input
input capacitance
output capacitance
VI = 0 V or VCC
outputs disabled; VO = 0 V
or VCC
25 °C
Min Typ Max
−1.2 −0.9 -
−40 °C to +85 °C Unit
Min
Max
−1.2
-V
2.5 2.9 -
2.5
3.0 3.4 -
3.0
2.0 2.4 -
2.0
- 0.42 0.55
-
- ±0.01 ±1.0
-
- ±5.0 ±100
-
[1] - ±5.0 ±50
-
-V
-V
-V
0.55 V
±1.0 µA
±100 µA
±50 µA
- 5.0 50
-
- −5.0 −50
-
- 5.0 50
-
[2] −180 −80 −50 −180
50 µA
−50 µA
50 µA
−50 mA
- 0.5 250
-
-
25 38
-
- 0.5 250
-
[3]
250 µA
38 mA
250 µA
- 0.5 1.5
-
- 0.01 50
-
- 0.5 1.5
-
-
4
-
-
-
7
-
-
1.5 mA
50 mA
1.5 mA
- pF
- pF
[1] This parameter is valid for any VCC between 0 V and 2.1 V with a transition time of up to 10 ms. For VCC = 2.1 V to VCC = 5 V ± 10 %, a
transition time of up to 100 µs is permitted.
[2] Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
[3] This is the increase in supply current for each input at 3.4 V.
74ABT827_3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 03 — 24 February 2010
© NXP B.V. 2010. All rights reserved.
5 of 14
Share Link: 