D4BS Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

D4BS

Safety-door Switch

Unspecified 

Characteristics

Degree of protection (see note 2)

Durability (see note 3)

Operating speed

Operating frequency

Rated frequency

Contact gap

Direct opening force (see note 4)

Direct opening travel (see note 4)

Full stroke

Insulation resistance

Contact resistance

Rated insulation voltage (Ui)

Conventional enclosed thermal current (Ithe)

Dielectric strength (Uimp)

Switching overvoltage

Conditional short-circuit current

Pollution degree (operating environment)

Insulation class

Vibration resistance

Shock resistance

Ambient temperature

Ambient humidity

Weight

IP67 (EN60947-5-1)

Mechanical:1,000,000 operations min.

Electrical:500,000 operations min. (10 A at 250 VAC, resistive load)

0.1 m/s to 0.5 m/s

30 operations/min max.

50/60 Hz

2 x 2 mm min.

19.61 N min. (EN60947-5-1)

20 mm min. (EN60947-5-1)

23 mm min.

100 MW min. (at 500 VDC) between terminals of same or different

polarity, between each terminal and ground, and between each ter-

minal and non-current-carrying metal part

25 mW max. (initial value)

600 V (EN60947-5-1)

20 A (EN60947-5-1)

Impulse dielectric strength (Uimp) 4 kV (EN60947-5-1) between ter-

minals of same or different polarity, between current-carrying metal

parts and ground, and between each terminal and non-current-car-

rying metal part

1,500 V max. (EN60947-5-1)

100 A (EN60947-5-1)

3 (EN60947-5-1)

Class I (with ground terminal)

Malfunction: 10 to 500 Hz, 0.65-mm single amplitude

Destruction:1,000 m/s2 min. (IEC68-2-27)

Malfunction:300 m/s2 min. (IEC68-2-27)

Operating:-40°C to 80°C (with no icing)

Operating:95% max.

Approx. 285 g (in the case of D4BS-15FS)

Note: 1. The above values are initial values.

2. Although the switch box is protected from dust, oil, or water penetration, do not use the D4BS in places where dust, oil, water, or chemicals

may penetrate through the key hole on the head, otherwise Switch damage or malfunctioning may occur.

3. The durability is for an ambient temperature of 5° C to 35° C and an ambient humidity of 40% to 70%. Contact your OMRON sales rep-

resentative for more detailed information on other operating environments.

4. These figures are minimum requirements for safe operation.

Contact Form (Diagrams Show State with Key Inserted)

Model

D4BS-#5#S

Contact form

Zb

11

12

1NC/1NO

23

24

D4BS-#A#S 2NC

Zb

11

12

21

22

11 - 12

23 - 24

Stroke

Operation Key

insertion com-

pletion position

11 - 12

21 - 22

Stroke

Operation Key

insertion com-

pletion position

Diagram

ON

Extraction

completion

position

ON

Extraction

completion

position

Remarks

Only NC contact 11-12

has an approved direct

opening mechanism.

Terminals 11-12 and

23-24 can be used as

unlike poles.

NC contacts 11-12 and

21-22 have an

approved direct

opening mechanism.

Terminals 11-12 and

21-22 can be used as

unlike poles.

Note: The terminal numbers are in accordance with EN50013, and the contact symbols are in accordance with IEC947-5-1.

D-106

Safety Sensors / Components

Share Link: