SST25VF016B
5.1 Power-Up Specifications
All functionalities and DC specifications are specified
for a VDD ramp rate of greater than 1V per 100 ms (0v
- 3.0V in less than 300 ms). See Table 5-7 and Figure
5-4 for more information.
TABLE 5-7:
Symbol
TPU-READ1
TPU-WRITE1
RECOMMENDED SYSTEM POWER-UP TIMINGS
Parameter
VDD Min to Read Operation
VDD Min to Write Operation
Minimum
100
100
Units
µs
µs
1. This parameter is measured only for initial qualification and after a design or process change that could affect this parameter.
FIGURE 5-4:
POWER-UP TIMING DIAGRAM
VDD
VDD Max
Chip selection is not allowed.
Commands may not be accepted or properly
interpreted by the device.
VDD Min
TPU-READ
TPU-WRITE
Device fully accessible
Time
1271 PwrUp.0
DS20005044C-page 22
Downloaded from: http://www.datasheetcatalog.com/
2015 Microchip Technology Inc.