DSPIC30F6011 Ver la hoja de datos (PDF) - Microchip Technology

Número de pieza

componentes Descripción

Fabricante

DSPIC30F6011

High Performance Digital Signal Controllers

Microchip Technology 

dsPIC30F6011/6012/6013/6014

dsPIC30F6011/6012/6013/6014 High Performance

Digital Signal Controllers

High Performance Modified RISC CPU:

• Modified Harvard architecture

• C compiler optimized instruction set architecture

• Flexible addressing modes

• 84 base instructions

• 24-bit wide instructions, 16-bit wide data path

• Up to 144 Kbytes on-chip Flash program space

• Up to 48K instruction words

• Up to 8 Kbytes of on-chip data RAM

• Up to 4 Kbytes of non-volatile data EEPROM

• 16 x 16-bit working register array

• Up to 30 MIPs operation:

- DC to 40 MHz external clock input

- 4 MHz-10 MHz oscillator input with

PLL active (4x, 8x, 16x)

• Up to 41 interrupt sources:

- 8 user selectable priority levels

- 5 external interrupt sources

- 4 processor traps

DSP Features:

• Dual data fetch

• Modulo and Bit-reversed modes

• Two 40-bit wide accumulators with optional

saturation logic

• 17-bit x 17-bit single cycle hardware fractional/

integer multiplier

• All DSP instructins are single cycle

- Multiply-Accumulate (MAC) operation

• Single cycle ±16 shift

Peripheral Features:

• High current sink/source I/O pins: 25 mA/25 mA

• Five 16-bit timers/counters; optionally pair up 16-

bit timers into 32-bit timer modules

• 16-bit Capture input functions

• 16-bit Compare/PWM output functions:

• Data Converter Interface (DCI) supports common

audio Codec protocols, including I2S and AC’97

• 3-wire SPI™ modules (supports 4 Frame modes)

• I2C™ module supports Multi-Master/Slave mode

and 7-bit/10-bit addressing

• Two addressable UART modules with FIFO

buffers

• Two CAN bus modules compliant with CAN 2.0B

standard

Analog Features:

• 12-bit Analog-to-Digital Converter (A/D) with:

- 100 Ksps conversion rate

- Up to 16 input channels

- Conversion available during Sleep and Idle

• Programmable Low Voltage Detection (PLVD)

• Programmable Brown-out Detection and Reset

generation

Special Microcontroller Features:

• Enhanced Flash program memory:

- 10,000 erase/write cycle (min.) for

industrial temperature range, 100K (typical)

• Data EEPROM memory:

- 100,000 erase/write cycle (min.) for

industrial temperature range, 1M (typical)

• Self-reprogrammable under software control

• Power-on Reset (POR), Power-up Timer (PWRT)

and Oscillator Start-up Timer (OST)

• Flexible Watchdog Timer (WDT) with on-chip low

power RC oscillator for reliable operation

• Fail-Safe Clock Monitor operation:

- Detects clock failure and switches to on-chip

low power RC oscillator

• Programmable code protection

• In-Circuit Serial Programming™ (ICSP™)

• Selectable Power Management modes:

- Sleep, Idle and Alternate Clock modes

CMOS Technology:

• Low power, high speed Flash technology

• Wide operating voltage range (2.5V to 5.5V)

• Industrial and Extended temperature ranges

• Low power consumption

 2004 Microchip Technology Inc.

Preliminary

DS70117C-page 1

Share Link: