19-213/G6C-AN1P2B/3T Ver la hoja de datos (PDF) - EVERLIGHT

Número de pieza

componentes Descripción

Fabricante

19-213/G6C-AN1P2B/3T

0603 Package Chip LED (0.6mm Height)

EVERLIGHT 

EVERLIGHT ELECTRONICS CO.,LTD.

4. Soldering Iron

19-213/G6C-AN1P2B/3T

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and

do soldering of each terminal. Be careful because the damage of the product is often started at the time

of the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand

whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD.

Office: No 25, Lane 76, Sec 3, Chung Yang Rd,

Tucheng, Taipei 236, Taiwan, R.O.C

Tel: 886-2-2267-2000, 2267-9936

Fax: 886-2267-6244, 2267-6189, 2267-6306

http://www.everlight.com

Everlight Electronics Co., Ltd.

Device No: SZDSE-193-G68

http://www.everlight.com

Prepared date: 2-Nov-2007

Rev 1

Page: 10 of 10

Prepared by: Zhouhua

Share Link: