MHR0312SA507G20 Ver la hoja de datos (PDF) - Unspecified
Número de pieza
componentes Descripción
Fabricante
MHR0312SA507G20 Datasheet PDF : 11 Pages
| |||
MHR0312SA type
High voltage reisistor
1. Feature
1. High resistance value : 1Mohm to 1000Mohm
2. High operating voltage : Single Use 5.0kVdc max.
Molded Use 7.5kVdc max.
3. Narrow tolerance : +/-0.5% till 100Mohm
4. High reliability resistor : Usage Original resistor material
2. GENERAL
2.1 Application
This catalogue applies to the HIGH VOLTAGE RESISTOR used for High Voltage
Power Supply.
Please contact us before using in the application of any other products.
2.2 Standard atmospheric test conditions
Unless otherwise specified, tests and measurements will be made under the standard
conditions(Temperature : 5℃～35℃, relative humidity : 45%～85%).
If there may be any doubt on results, tests and measurements will be made under
the following conditions, temperature : 25℃ +/- 2℃, relative humidity : 65% +/- 5%.
If the test will be made under the special conditions, the measurememt will be made
leaving under the standard conditions for 1 hour to 2 hours.
3. RATING
3.1 Part numbering
MHR 0312 S A ○○○ △ □□
1
2
34
5
6
7
1. High-Voltage Resistors
2. Substrate Dimensions (approximately : 3mm X 12mm)
3. Type (S : Standard type)
4. Circuit (A : One Resistor)
5. Resistance
The first and second figures are significant digits, and the third figure expresses
the number of zeros which follow the two figures. (ex. 206=20M ohm)
(Value of standard step resistor : 10, 15, 20, 25, 30, 40, 50, 68, 80)
6. Resistance Tolerance (D:+/-0.5%,F:+/-1%,G:+/-2%,J:+/-5%,K:+/-10%,M:+/-20%)
7. Maximum
rated VoltageSingle Use：70
Molded Use:20
1
Jan 2019
Share Link: 