UT8Q1024K8-UPX Ver la hoja de datos (PDF) - Aeroflex UTMC
Número de pieza
componentes Descripción
Fabricante
UT8Q1024K8-UPX Datasheet PDF : 14 Pages
| |||
WRITE CYCLE
A combination of Wn less than VIL(max) and En less than
VIL(max) defines a write cycle. The state of G is a “don’t care”
for a write cycle. The outputs are placed in the high-impedance
state when eitherG is greater than V IH(min), or when Wn is less
than VIL(max).
Write Cycle 1, the Write Enable-controlled Access is defined
by a write terminated by Wn going high, with En still active.
The write pulse width is defined by tWLWH when the write is
initiated byWn, and by tETWH when the write is initiated byEn.
Unless the outputs have been previously placed in the high-
impedance state byG, the user must wait t WLQZ before applying
data to the eight bidirectional pins DQ(7:0) to avoid bus
contention.
Write Cycle 2, the Chip Enable-controlled Access is defined by
a write terminated by the former of En or Wn going inactive.
The write pulse width is defined by tWLEF when the write is
initiated by Wn, and by tETEF when the write is initiated by the
En going active. For the Wn initiated write, unless the outputs
have been previously placed in the high-impedance state byG,
the user must wait tWLQZ before applying data to the eight
bidirectional pins DQ(7:0) to avoid bus contention.
TYPICAL RADIATION HARDNESS
The UT8Q1024K8 SRAM incorporates features which allow
operation in a limited radiation environment.
Table 2. Typical Radiation Hardness
Design Specifications1
Total Dose
50
krad(Si) nominal
Heavy Ion
Error Rate 2
<1E-8
Errors/Bit-Day
Notes:
1. The SRAM will not latchup during radiation exposure under recommended
operating conditions.
2. 90% worst case particle environment, Geosynchronous orbit, 100 mils of
Aluminum.
3
Share Link: 