ABJ141040 Ver la hoja de datos (PDF) - Panasonic Corporation
Número de pieza
componentes Descripción
Fabricante
ABJ141040 Datasheet PDF : 11 Pages
| |||
ABJ1,2,3,4,5
2. Characteristics
Mechanical life
(O.T.: Specified value)
Leaf lever, Long stroke type
Wire leads (right & left side type)
Other types
Min. 5×105 (at 60 cpm)
Min. 3×105 (at 60 cpm)
Min. 106 (at 60 cpm)
Electrical life at rated load
(O.T.: max.)
AgNi alloy contact type
Min. 3×104 (at 20 cpm)
AgNi alloy + Au clad contact type Min. 105 (at 20 cpm)
Insulation resistance
Min. 100 MΩ (at 500 V DC insulation resistance meter)
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
600 Vrms
1,500 Vrms
1,500 Vrms
Vibration resistance (Pin plunger type)
10 to 55 Hz at single amplitude of 0.75 mm (Contact opening max. 1 msec.)
Shock resistance (Pin plunger type)
Min. 294 m/s2{30 G} (Contact opening max. 1 msec.)
Contact resistance (Initial)
Silver contact type
Gold clad contact type
Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ
(By voltage drop 1 A 6 to 8 V DC)
Dust protected type (IP50): Max. 100 mΩ
Immersion protected type (IP67): Max. 150 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load)
1 to 500 mm/sec.
Max. operating cycle rate (at no load)
Other type: 120 cpm
Long stroke type: 60 cpm
Ambient temperature
–40°C to +85°C
Unit weight
Approx. 0.5 g (IP50 type)
Water resistance
IP67 (Wire leads type)
3. Operating characteristics
Type of actuator
Operating force,
Max.
Release force,
Min
Pin plunger
1.23N
1.96N
0.15N
0.25N
Hinge lever
0.39N
0.64N
0.029N
0.049N
Simulated roller lever
0.39N
0.64N
0.029N
0.049N
Roller lever
0.39N
0.64N
0.029N
0.049N
0.98N
0.20N
Leaf lever
1.27N
1.76N
0.22N
0.26N
1.27N
0.29N
Pretravel,
Max. mm
0.6
3.0
3.0
3.0
6.0
2.6
2.6
6.0
Movement
differential,
Max. mm
0.12
0.5
0.5
0.5
1.0
0.5
0.5
1.0
Overtravel,
Min. mm
0.25
0.5
0.5
0.5
2.5
1.4
1.4
2.5
Operating position,
mm
Mounting hole: 1.2
5.5±0.2
Mounting hole: 2.3
7.0±0.2
Mounting hole: 1.2
6.8±1.0
Mounting hole: 2.3
8.3±1.0
Mounting hole: 1.2
9.8±1.0
Mounting hole: 2.3
11.3±1.0
Mounting hole: 1.2
13.1 ±1.0
Mounting hole: 2.3
14.6±1.0
Mounting hole: 3.0
16.0±2.0
Fixed pin type
10.7±0.7
Mounting hole: 3.0
16.25±0.7
Fixed pin type
10.7±0.7
Mounting hole: 3.0
16.25±0.7
Mounting hole: 3.0
16.0±2.0
Long stroke type
2.45N
0.20N
—
0.5
2.0
2.5±0.4
Note: The O.P. differs between the 1.2 mm and 2.3 mm dia. installation hole types.
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
AECTB1E 201201-T
Share Link: 