DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

TS912BIN Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza
componentes Descripción
Fabricante
TS912BIN Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Absolute maximum ratings and operating conditions
TS912
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VCC
Vid
Vi
Iin
Io
Tstg
Tj
Rthja
Rthjc
ESD
Supply voltage (1)
Differential input voltage (2)
Input voltage (3)
Current on inputs
Current on outputs
Storage temperature
Maximum junction temperature
Thermal resistance junction to ambient (4)
DIP8
SO-8
Thermal resistance junction to case (4)
DIP8
SO-8
HBM: human body model(5)
MM: machine model(6)
CDM: charged device model(7)
18
±18
-0.3 to 18
±50
±130
-65 to +150
150
85
125
41
40
3
200
1500
V
V
V
mA
mA
°C
°C
°C/W
°C/W
kV
V
V
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output voltages must never exceed VCC+ +0.3V.
4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-circuits on all
amplifiers. These values are typical.
5. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a 1.5kΩ resistor
between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating.
6. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between two pins of the
device with no external series resistor (internal resistor < 5Ω). This is done for all couples of connected pin combinations
while the other pins are floating.
7. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly
to the ground through only one pin. This is done for all pins.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
VCC
Vicm
Toper
Supply voltage
Common mode input voltage range
Operating free air temperature range
2.7 to 16
V
VCC--0.2 to VCC++0.2
V
-40 to + 125
°C
2/18

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]