SA605 Ver la hoja de datos (PDF) - NXP Semiconductors.
Número de pieza
componentes Descripción
Fabricante
SA605 Datasheet PDF : 25 Pages
| |||
SA605
High performance low power mixer FM IF system
Rev. 5 — 14 November 2014
Product data sheet
1. General description
The SA605 is a high performance monolithic low-power FM IF system incorporating a
mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector,
muting, logarithmic received signal strength indicator (RSSI), and voltage regulator. The
SA605 combines the functions of NXP SA602A and SA604A, but features a higher mixer
input intercept point, higher IF bandwidth (25 MHz) and temperature compensated RSSI
and limiters permitting higher performance application. The SA605 is available in 20-lead
SO (surface-mounted miniature package) and 20-lead SSOP (shrink small outline
package).
The SA605 and SA615 are functionally the same device types. The difference between
the two devices lies in the guaranteed specifications. The SA615 has a higher ICC, lower
input third-order intercept point, lower conversion mixer gain, lower limiter gain, lower AM
rejection, lower SINAD, higher THD, and higher RSSI error than the SA605. Both the
SA605 and SA615 devices meet the EIA specifications for AMPS and TACS cellular radio
applications.
2. Features and benefits
Low power consumption: 5.7 mA typical at 6 V
Mixer input to >500 MHz
Mixer conversion power gain of 13 dB at 45 MHz
Mixer noise figure of 4.6 dB at 45 MHz
XTAL oscillator effective to 150 MHz (L/C oscillator to 1 GHz local oscillator can be
injected)
102 dB of IF amplifier/limiter gain
25 MHz limiter small signal bandwidth
Temperature-compensated logarithmic Received Signal Strength Indicator (RSSI) with
a dynamic range in excess of 90 dB
Two audio outputs — muted and unmuted
Low external component count; suitable for crystal/ceramic/LC filters
Excellent sensitivity: 0.22 V into 50 matching network for 12 dB SINAD
(Signal-to-Noise-and-Distortion ratio) for 1 kHz tone with RF at 45 MHz and IF at
455 kHz
SA605 meets cellular radio specifications
ESD hardened
Share Link: 