OP223 Ver la hoja de datos (PDF) - Optek Technology
Número de pieza
componentes Descripción
Fabricante
OP223 Datasheet PDF : 3 Pages
| |||
Hi-Reliability GaAIAs Infrared Emitting Diode
OP223, OP224 (TX, TXV)
OP224 (S)
Absolute Maximum Ratings (TA = 25° C unless otherwise noted)
Storage Temperature Range
Operating Temperature Range
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron](1)
Reverse Voltage
Continuous Forward Current
Power Dissipation(2)
-65o C to +150o C
-55o C to +125o C
260° C
2.0 V
100 mA
100 mW
Notes:
1. No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
2. Derate linearly 1.00 mW/° C above 25° C.
Electrical Characteristics (TA = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode
EE (APT)
Radiant Power Output
OP223 (TX, TXV)
OP224 (S, TX, TXV)
VF
Forward Voltage
IR
Reverse Current
λP
Wavelength at Peak Emission
B
Spectral Bandwidth between Half Power
Points
∆λP /∆T Spectral Shift with Temperature
θHP Emission Angle at Half Power Points
1.00 -
-
1.50 -
-
0.80 - 1.80
-
- 100
- 890 -
mW IF = 50 mA
IF = 50 mA
V IF = 50 mA
µA VR= 2.0 V
nm IF = 50 mA
-
80
-
nm IF = 50 mA
- 0.18 - nm/°C IF = Constant
-
18
- Degree IF = 50 mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3 09/13
Page 2 of 3
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Share Link: 