M5100 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

M5100

Heavy Industrial Pressure Transducer

Unspecified 

M5100 Heavy Industrial Pressure Transducer

OUTPUT OPTIONS

Code

3

4

5

6

7

8

Output

0.5 – 4.5V (ratiometric)

1 – 5V

4 – 20mA

0 – 5V

0 – 10V

1 – 6V

ORDERING INFORMATION

M5131-000005-300PG

Supply (V)

5 ± 0.25 Ratiometric

8 – 30

9 – 30

8 – 30

15 – 30

8 – 30

Type (G = Gage)

Units (P = psi, B = Bar)

Pressure Range (See Pressure Range Table)

Pressure Port (See Pressure Port Options Table)

Specials (nnnnn = Custom Drawing)

Connection (See Electrical Connections Table)

Output (See Output Options Table)

Model

NORTH AMERICA

Measurement Specialties

45738 Northport Loop West

Fremont, CA 94538

Tel: 1-800-767-1888

Fax: 1-510-498-1578

Sales: pfg.cs.amer@meas-spec.com

EUROPE

Measurement Specialties

(Europe), Ltd.

26 Rue des Dames

78340 Les Clayes-sous-Bois, France

Tel: +33 (0) 130 79 33 00

Fax: +33 (0) 134 81 03 59

Sales: pfg.cs.emea@meas-spec.com

ASIA

Measurement Specialties

(China), Ltd.

No. 26 Langshan Road

Shenzhen High-Tech Park (North)

Nanshan District, Shenzhen 518057

China

Tel: +86 755 3330 5088

Fax: +86 755 3330 5099

Sales: pfg.cs.asia@meas-spec.com

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for

inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the

manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement

Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does

Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims

any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different

applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement

Specialties, Inc. does not convey any license under its patent rights nor the rights of others.

M5100

www.meas-spec.com

7/7

June 2012

Share Link: