SRM-1016 Ver la hoja de datos (PDF) - Sirenza Microdevices => RFMD
Número de pieza
componentes Descripción
Fabricante
SRM-1016 Datasheet PDF : 6 Pages
| |||
Package Dimensions (“16” Package)
Dimensions in inches (mm)
SRM-1016 SiGe Active Receive Mixer
SRM
1016
XZZZZ
Part #
Lot #
Suggested PCB Test Pad Layout
0.012
(0.30)
0.049
(1.25)
0.118
(3.0)
0.024
(0.63)
NOTES:
1. PACKAGE BODY SIZES EXCLUDE MOLD FLASH
PROTRUSIONS OR GATE BURRS.
2. TOLERANCE ±.004" (0.1mm) UNLESS OTHERWISE
SPECIFIED.
3. COPLANARITY: .004" (0.1mm)
4. CONTROLLING DIMENSION IS MILLIMETER,
CONVERTED INCH DIMENSIONS ARE NOT
NECESSARILY EXACT.
5. FOLLOWED FROM JEDEC MO-153.
Pin Out Description
Pin # Function
Description
1
IFP
IF output, positive terminal
2
VCC
Positive supply (+5V)
3
VEE
Ground
4
RFP
RF input, positive terminal
5
RFN
RF input, negative terminal
6
VEE
Ground
7
VCC
Positive supply (+5V)
8
L1
External inductor terminal
9
L2
External inductor terminal
10
VCC
Positive supply (+5V)
11
VEE
Ground
12
LON
LO input, negative terminal
13
LOP
LO input, positive terminal
14
VEE
Ground
15
VCC
Positive supply (+5V)
16
IFN
IF output, negative terminal
0.014
(0.35)
0.118
(3.0)
0.028
0°
8°
φ0.010 (0.25) via
(0.7)
0.035
(0.9)
0.272 (6.9)
all units are in inches (mm)
- Indicates metalization - vias connect pad to underlying ground plane
Additional Comments
Nominal DC voltage is 1.6V. Output should be AC-coupled
Nominal DC voltage is 2.1V. (Internally biased) Input should be AC-coupled.
Nominal DC voltage is 2.1V. (Internally biased) Input should be AC-coupled.
Nominal DC voltage is 5V, provided through off chip inductors.
Nominal DC voltage is 5V, provided through off chip inductors.
Nominal DC voltage is 2.4V. (Internally biased) Input should be AC-coupled.
Nominal DC voltage is 2.4V. (Internally biased) Input should be AC-coupled.
Nominal DC voltage is 1.6V. Output should be AC-coupled.
Absolute Maximum Ratings
Parameters
Value
Unit
Supply Voltage (Vcc)
LO Input (LOP, LON)
+6.0
+10
VDC
dBm
RF Input (RFP, RFN)
+15
dBm
Operating Temperature
-40 to +85
ºC
Storage Temperature
-65 to +150
ºC
Operation of this device beyond any one of these limits may
cause permanent damage. For reliable continuous operation the
device voltage and current must not exceed the maximum oper-
ating values specified in the table on page one.
Part Number Ordering Information
Part Number
Reel Size
Devices/Reel
SRM-1016
7”
1000
Caution: ESD Sensitive
Appropriate precaution in handling, packaging
and testing devices must be observed.
522 Almanor Ave., Sunnyvale, CA 94085
Phone: (800) SMI-MMIC
4
http://www.sirenza.com
EDS-102145 Rev B
Share Link: 