PLC-60 Ver la hoja de datos (PDF) - Mean Well Enterprises Co., Ltd.

Número de pieza

componentes Descripción

Fabricante

PLC-60

60W Single Output LED Power Supply

Mean Well Enterprises Co., Ltd. 

60W Single Output LED Power Supply

PLC-60 series

■ Features :

Universal AC input / Full range

High efficiency up to 89%

Adjustable output voltage and current level

Protections: Short circuit / Over current / Over voltage / Over temperature

Cooling by free air convection

Built-in constant current limiting circuit

Fully isolated plastic case with terminal block style of I/O

Built-in active PFC function, comply with EN61000-3-2 class C

(≧75% load)

Class 2 power unit

Pass LPS

100% full load burn-in test

High reliability

Suitable for LED lighting and moving sign applications (Note.2)

Compliance to worldwide safety regulations for lighting

2 years warranty

SPECIFICATION

LPS F

110

M

M SELV

( for 48V only)

..

( except for 48V )

MODEL

PLC-60-12

PLC-60-15

PLC-60-20

PLC-60-24

PLC-60-27

PLC-60-36

PLC-60-48

DC VOLTAGE

12V

CONSTANT CURRENT REGION Note.6 8.4 ~ 12V

RATED CURRENT

5A

15V

10.5 ~15V

4A

20V

14 ~ 20V

3A

24V

16.8 ~24V

2.5A

27V

18.9 ~27V

2.3A

36V

25.2 ~ 36V

1.7A

48V

33.6 ~ 48V

1.3A

OUTPUT

CURRENT RANGE

0 ~ 5A

0 ~ 4A

0 ~ 3A

RATED POWER

60W

60W

60W

RIPPLE & NOISE (max.) Note.2 2Vp-p

2.4Vp-p

1.8Vp-p

VOLTAGE ADJ. RANGE Note.5 11.5 ~ 13V

14.5 ~ 16.2V 19.5 ~ 22V

CURRENT ADJ. RANGE Note.5 3.75 ~ 5.15A 3 ~ 4.12A

2.25 ~ 3.09A

VOLTAGE TOLERANCE Note.3 ±10%

LINE REGULATION

±3.0%

LOAD REGULATION

±5.0%

SETUP TIME

500ms / 230VAC 3000ms / 115VAC at full load

0 ~ 2.5A

60W

2.4Vp-p

24 ~ 26V

1.875 ~ 2.575A

0 ~ 2.3A

62.1W

2.7Vp-p

25 ~ 30V

1.725 ~ 2.369A

0 ~ 1.7A

61.2W

3.6Vp-p

32.5 ~ 39V

1.275 ~ 1.751A

0 ~ 1.3A

62.4W

4.6Vp-p

43.6 ~ 51.8V

0.975 ~ 1.339A

VOLTAGE RANGE Note.4 90 ~ 264VAC

FREQUENCY RANGE

47 ~ 63Hz

127 ~ 370VDC

POWER FACTOR (Typ.)

PF>0.92/115VAC, PF>0.9/230VAC at full load (Please refer to "Power Factor Characteristic" curve)

TOTAL HARMONIC DISTORTION THD< 20% when output loading≧75% at 115VAC/230VAC input

INPUT EFFICIENCY (Typ.)

85%

86%

87.5%

87%

88%

89%

89%

AC CURRENT (Typ.)

INRUSH CURRENT (Typ.)

0.8A/115VAC 0.4A/230VAC

COLD START 35A(twidth=35μs measured at 50% Ipeak) at 230VAC

MAX. No. of PSUs on 16A

CIRCUIT BREAKER

32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

OVER CURRENT

SHORT CIRCUIT

PROTECTION OVER VOLTAGE

95 ~ 110%

Protection type : Constant current limiting, recovers automatically after fault condition is removed

Hiccup mode, recovers automatically after fault condition is removed.

13.8 ~ 16V

17.5 ~ 21V

23 ~ 26V

28 ~ 32V

31 ~ 35V

41 ~ 46V

Protection type : Shut down o/p voltage, re-power on to recover

54 ~ 60V

OVER TEMPERATURE

Shut down o/p voltage, recovers automatically after temperature goes down

WORKING TEMP.

WORKING HUMIDITY

ENVIRONMENT STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

-30 ~ +50℃ (Refer to "Derating Curve")

20 ~ 95% RH non-condensing

-40 ~ +80℃, 10 ~ 95% RH

±0.03%/℃ (0 ~ 50℃)

VIBRATION

SAFETY STANDARDS

10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

UL1310, TUV EN61347-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V), J61347-1, J61347-2-13 approved

WITHSTAND VOLTAGE

SAFETY &

ISOLATION RESISTANCE

EMC

EMC EMISSION

EMC IMMUNITY

MTBF

I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (≧75% load) ; EN61000-3-3

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61547, light industry level, criteria A

515Khrs min. MIL-HDBK-217F (25℃)

OTHERS

NOTE

DIMENSION

181.5*62*35mm (L*W*H)

PACKING

0.41Kg; 30pcs/13.3Kg/0.67CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltage. Please check the static characteristics for more details.

5. Output voltage can be adjusted through the SVR1 on the PCB ; limit of output constant current level can be adjusted through the SVR2 on the PCB.

6. Please refer to "DRIVING METHODS OF LED MODULE".

7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

8. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.

9. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently

connected to the mains.

File Name:PLC-60-SPEC 2015-05-28

Share Link: