ATF2500C Ver la hoja de datos (PDF) - Atmel Corporation
Número de pieza
componentes Descripción
Fabricante
ATF2500C Datasheet PDF : 24 Pages
| |||
ATF2500C
10. Absolute Maximum Ratings*
Temperature Under Bias................................ -55°C to +125°C
Storage Temperature ..................................... -65°C to +150°C
Junction Temperature ............................................. 150°C Max
Voltage on Any Pin with
Respect to Ground .........................................-2.0V to +7.0V(1)
11. DC and AC Operating Conditions
Operating Temperature
VCC Power Supply
Commercial
0°C - 70°C
(Ambient)
5V ± 5%
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Note:
1. Minimum voltage is -0.6V DC which may under-
shoot to -2.0V for pulses of less than 20 ns.
Maximum output pin voltage is VCC + 0.75V DC
which may overshoot to +7.0V for pulses of less
than 20 ns.
Industrial
-40°C - 85°C
(Ambient)
5V ± 10%
Military
-55°C - 125°C
(Case)
5V ± 10%
11.1 ATF2500C DC Characteristics
Symbol Parameter
Condition
Min
Typ
Max
Units
IIL
Input Load Current VIN = -0.1V to VCC + 1V
ILO
Output Leakage
Current
VOUT = -0.1V to VCC + 0.1V
10
µA
10
µA
VCC = MAX,
Com.
ICC
Power Supply
Current Standby
VIN = GND or
VCC f = 0 MHz,
Outputs Open
ATF2500C
Ind., Mil.
80
110
mA
80
130
mA
VIL
VIH
VOL
VOH
Note:
Input Low Voltage
Input High Voltage
MIN ≤VCC ≤MAX
Output Low
Voltage
VIN = VIH or VIL,
VCC = 4.5V
IOL = 8 mA
IOL = 6 mA
Output High
Voltage
VCC = MIN
IOH = -100 µA
IOH = -4.0 mA
1. See ICC versus frequency characterization curves.
Com., Ind.
Mil.
-0.6
2.0
VCC - 0.3
2.4
0.8
V
VCC + 0.75
V
0.5
V
0.5
V
V
11
0777K–PLD–1/24/08
Share Link: 