P2827 Ver la hoja de datos (PDF) - ETAL Group

Número de pieza

componentes Descripción

Fabricante

P2827

POWERLINE CARRIER ISOLATION TRANSFORMER

ETAL Group 

P2827

SAFETY

Constructed in accordance with IEC 60950-1:2001,

EN 60950-1:2001 and UL 60950-1, first Edition,

reinforced insulation 250Vrms maximum working

voltage, flammability class V-0.

Distance through solid insulation 0.4mm minimum.

Creepage and clearances in circuit are 9mm

minimum where PCB pads do not exceed Ø3mm.

ABSOLUTE MAXIMUM RATINGS

(Ratings of components independent of circuit).

Short term isolation voltage (1s)

Coil temperature (continuous)

Storage temperature

Lead temperature, 10s

4.6kVrms,

6.5kVDC

155°C

-40°C to

+125°C

260°C

CERTIFICATION

Certified under the IEC CB scheme (Certificate

DK-9431) to IEC 60950-1:2001, sub-clauses 1.5,

1.5.1, 1.5.2, 1.7, 1.7.1, 2, 2.9, 2.9.1, 2.9.2, 2.9.3,

2.10, 2.10.1, 2.10.2, 2.10.3, 2.10.3.1, 2.10.3.3,

2.10.4, 2.10.5, 2.10.5.1, 2.10.5.4, 4, 4.7, 4.7.1, 4.7.3,

4.7.3.1, 4.7.3.4, 5, 5.2, 5.2.1, and 5.2.2 for a

maximum working voltage of 250Vrms, nominal

mains supply voltage not exceeding 250Vrms and a

maximum operating temperature of 85°C in

Pollution Degree 2 environments, reinforced

insulation, including national differences for

Denmark, Finland, Germany, Norway, Sweden,

Switzerland, USA, Canada and UK.

Recognized under the Component Recognition

Program of Underwriters Laboratories Inc. to US and

Canadian requirements CAN/CSA C22.2

No. 60950-1-03/UL60950-1, First Edition, based on

IEC 60950-1, First Edition, maximum working

voltage 250Vrms, Pollution Degree 2, reinforced

insulation.

UL File number E203175.

Additionally, Profec Technologies certifies all

transformers as providing voltage isolation of

3.88kVrms, 5.5kV DC minimum. All shipments are

supported by a certificate of conformity to current

applicable safety standards.

COPYRIGHT

ETAL, P2820, and P2827 are Trade Marks of

Profec Technologies Ltd.

The Trade Mark ETAL is registered at the UK

Trade Marks Registry.

Profec Technologies Ltd. is the owner of the

design right under the Copyright Designs and

Patents Act 1988 and no rights or licences are

hereby granted or implied to any third party.

© 1996 - 2007 Profec Technologies Ltd.

Reproduction prohibited.

E203175

ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela

Telephone: +358 (0)20 7500 330 Fax: +358 (0)20 7500 333

Website: www.etalgroup.com Email: etalgroup@egruppen.com

ISO 9001

FM 25326

ETALDOC 886/1

Page 4 of 4

September 2007

Share Link: