P2820 Ver la hoja de datos (PDF) - ETAL Group

Número de pieza

componentes Descripción

Fabricante

P2820

POWERLINE CARRIER ISOLATION TRANSFORMERS

ETAL Group 

CONSTRUCTION

e2

P2820, P2821, P2822, P2823

Dimensions shown are in millimetres (inches).

Geometric centres of outline and pad grid coincide within a tolerance circle of 0.3mmØ.

Windings may be used interchangeably a primary or secondary.

SAFETY

Constructed in accordance with IEC 60950-1:2001,

EN 60950-1:2001 and UL 60950-1, first Edition,

reinforced insulation 250Vrms maximum working

voltage, flammability class V-0.

Distance through solid insulation 0.4mm minimum.

Creepage and clearances in circuit are 9mm

minimum where PCB pads do not exceed Ø3mm.

CERTIFICATION

Certified under the IEC CB scheme (Certificate

DK-9431) to IEC 60950-1:2001, sub-clauses 1.5,

1.5.1, 1.5.2, 1.7, 1.7.1, 2, 2.9, 2.9.1, 2.9.2, 2.9.3,

2.10, 2.10.1, 2.10.2, 2.10.3, 2.10.3.1, 2.10.3.3,

2.10.4, 2.10.5, 2.10.5.1, 2.10.5.4, 4, 4.7, 4.7.1, 4.7.3,

4.7.3.1, 4.7.3.4, 5, 5.2, 5.2.1, and 5.2.2 for a

maximum working voltage of 250Vrms, nominal

mains supply voltage not exceeding 250Vrms and a

maximum operating temperature of 85ºC in

Pollution Degree 2 environments, reinforced

insulation, including national differences for

Denmark, Finland, Germany, Norway, Sweden,

Switzerland, USA, Canada and UK.

Recognized under the Component Recognition

Program of Underwriters Laboratories Inc. to US and

Canadian requirements CAN/CSA C22.2

No. 60950-1-03/UL60950-1, First Edition, based on

IEC 60950-1, First Edition, maximum working

voltage 250Vrms, Pollution Degree 2, reinforced

insulation.

UL File number E203175.

Additionally, Profec Technologies certifies all

transformers as providing voltage isolation of

3.88kVrms, 5.5kV DC minimum. All shipments are

supported by a certificate of conformity to current

applicable safety standards.

ETALDOC 345/10

Page 5 of 6

March 2006

Share Link: