JVN1AF-4.5V-F(2012) Ver la hoja de datos (PDF) - Panasonic Corporation
Número de pieza
componentes Descripción
Fabricante
JVN1AF-4.5V-F
(Rev.:2012)
(Rev.:2012)
Panasonic Corporation
JVN1AF-4.5V-F Datasheet PDF : 3 Pages
| |||
JV-N
RATING
1. Coil data
Nominal coil
voltage
4.5V DC
6V DC
9V DC
12V DC
18V DC
24V DC
48V DC
100V DC
Pick-up voltage
(at 20°C 68°F)
75%V or less of
nominal voltage
Min. 60 VDC
Drop-out voltage
(at 20°C 68°F)
5%V or more of
nominal voltage
Min. 4 VDC
Nominal operating
current
[±10%] (at 20°C 68°F)
44.4mA
33.3mA
22.2mA
16.7mA
11.1mA
8.3mA
4.2mA
6 mA
Coil resistance
[±10%] (at 20°C 68°F)
101Ω
180Ω
405Ω
720Ω
1,620Ω
2,880Ω
11,520Ω
16,600Ω
Nominal operating
power
200mW
600mW
Max. applied voltage
(at 20°C 68°F)
150%V of
nominal voltage
110%V
2. Specifications
Characteristics
Contact
Item
Contact material
Arrangement
Contact resistance (Initial)
Nominal switching capacity (resistive load)
Specifications
AgSnO2 type
1 Form A
Max. 100 mΩ (By voltage drop 6 V DC 1A)
16A 125V AC, 10A 277V AC, 10A 30V DC, 10A 125V AC (Only for Flux-resistance type)
Max. switching power (resistive load)
2,770VA, 300W
Rating
Max. switching voltage
Max. switching current
277V AC, 30V DC
16A (125V AC), 10A (DC)
Nominal operating power
200mW (4.5 to 48V DC), 600mW (100V DC)
Min. switching capacity (reference value)*1
Insulation resistance (Initial)
Breakdown voltage Between open contacts
(Initial)
Between contact and coil
Electrical
Temperature rise (coil)
characteristics
100mA, 5V DC
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1 min. (Detection current: 10 mA)
2,500 Vrms for 1 min. (Detection current: 10 mA)
Max. 45°C 113°F (4.5 to 48V DC), Max. 55°C 131°F (100V DC)
[By resistive method, nominal coil voltage applied to the coil; contact carrying current: 16A,
at 70°C 158°F (4.5 to 48V DC), at 60°C 140°F (100V DC)]
Mechanical
characteristics
Expected life
Surge breakdown voltage*2
(Between contact and coil) (Initial)
Operate time (at nominal voltage) (at 20°C 68°F)
Release time (at nominal voltage) (at 20°C 68°F)
Shock resistance
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical (at 180 times/min.)
Electrical (at 20 times/min.)
Conditions
Conditions for operation, transport and storage*3
4,500 V
Max. 12 ms (4.5 to 48V DC), Max. 8 ms (100V DC) (excluding contact bounce time.)
Max. 5 ms (excluding contact bounce time) (Without diode)
200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 2.0 mm
Min. 2×107
Min. 3×104 (sealed type, 16A 125V AC), Min. 5×104 (sealed type, 10A 277V AC),
Min. 105 (sealed type, 10A 30V DC), Min. 105 (Flux-resistant type, 10A 125V AC)
Ambient temperature: –40°C to +70°C –40°F to +158°F (4.5 to 48V DC),
–40°C to +60°C –40°F to +140°F (100V DC),
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature),
Air pressure: 86 to 106kPa
Max. operating speed
20 times/min. (at nominal switching capacity)
Unit weight
Approx. 8 g .28 oz
* Specifications will vary with foreign standards certification ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
ASCTB189E 201202-T
Share Link: