HMC132C8(2001) Ver la hoja de datos (PDF) - Hittite Microwave

Número de pieza

componentes Descripción

Fabricante

HMC132C8
(Rev.:2001)

GaAS MMIC SMT HIGH-ISOLATION SPDT SWITCH DC - 8 GHZ

Hittite Microwave 

'n99ew!

MICROWAVE CORPORATION

HMC132C8

HMC132C8 SMT HIGH-ISOLATION SPDT SWITCH DC - 8 GHZ

FEBRUARY 2001

Evaluation Circuit Board

7

The circuit board used in the final application should use RF circuit design techniques. Signal lines should have

50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to

that shown above. A sufficient number of VIA holes should be used to connect the top and bottom ground planes.

The evaluation circuit board as shown is available from Hittite upon request.

Evaluation Circuit Board Layout Design Details

Layout Technique

Material

Dielectric Thickness

50 Ohm Line Width

Gap to Ground Edge

Ground VIA Hole Diameter

Connectors

Grounded Co-Planar Waveguide (GCPW)

Rogers 4350

0.020" (0.51 mm)

0.034" (0.86 mm)

0.010" (0.25 mm)

0.014" (0.36 mm)

SMA-F ( EF - Johnson P/N 142-0701-806)

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

7 - 10

Web Site: www.hittite.com

Share Link: