TK65920 Ver la hoja de datos (PDF) - Toko America Inc

Número de pieza

componentes Descripción

Fabricante

TK65920

MEDIUM EL LAMP DRIVER

Toko America Inc  

TK6592x

PIN DESCRIPTIONS

SUPPLY PIN (VCC)

This pin is the positive input supply for the TK6592x. Good design practices dictate capacitive decoupling to the ground

pin.

GROUND PIN (GND)

The pin provides the ground connection for the IC.

IND PIN

This pin is periodically pulled to ground by a power transistor acting as an internal switch to the TK6592x. Externally, this

pin is typically connected to an inductor and a rectifying diode. By modulating the switching action of the internal switch,

the TK6592x can boost the relatively low voltage of the battery to the high voltage required to drive the EL Lamp.

HV PIN

This pin is connected to the filter capacitor and the cathode of the rectifying diode in order to generate a high voltage

supply. This high voltage supply is switched to the terminals of the EL Lamp through the H-Bridge.

EL+ PIN

This pin is connected to one side of the EL Panel.

EL- PIN

This pin is connected to the other side of the EL Panel.

Note: Measuring the voltage across the EL lamp (EL+ pin to EL- pin) should be done with balanced scope probes using

differential measurement techniques to obtain a true waveform of the voltage across the EL lamp.

May 2000 TOKO, Inc.

Page 11

Share Link: