TES2H Ver la hoja de datos (PDF) - TRACO Electronic AG

Número de pieza

componentes Descripción

Fabricante

TES2H

DC/DC Converter

TRACO Electronic AG 

TES 2H Series, 2 Watt

Input Specifications

Input current no load / full load

5 Vin; 3.3 VDC model:

5 Vin; other models:

12 Vin; 3.3 VDC model:

12 Vin; other models:

24 Vin; 3.3 VDC model:

24 Vin; other models:

60 mA / 470 mA typ.

60 mA / 540 mA typ.

30 mA / 190 mA typ.

30 mA / 210 mA typ.

15 mA / 95 mA typ.

15 mA / 110 mA typ.

Surge voltage (1 sec. max.)

5 Vin models: 9 V max.

12 Vin models: 18 V max.

24 Vin models: 30 V max.

Under voltage shut down

12 Vin models: 8 VDC typ.

24 Vin models: 16 VDC typ.

48 Vin models: 34 VDC typ.

Reverse voltage protection 0.3 A max.

Input filter internal capacitor

Output Specifications

Voltage set accuracy see graphs below

Voltage balance (dual output models, balanced load) 1 % max.

Regulation

– Input variation 1.2 % / 1 % change Vin

– Load variation 0 – 100 %

see graphs below

Minimum load not required

Ripple and noise (20 MHz Bandwidth) 120 mVp-p max.

Temperature coefficient ±0.02 %/K typ.

Short circuit protection limited 0.5s max.

Capacitive load

3.3 & 5.0 VDC models: 47 µF max.

12 & ±5 VDC models: 10 µF max.

±12 & ±15 VDC models: 4.7 µF max.

General Specifications

Temperature ranges

– Operating (convection cooling 20LFM, 0,1m/s) –40°C to +85°C

– Case temperature +95°C max.

– Storage temperature –40°C to +125°C

Derating (convection cooling) 4 %/K above 75°C

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >2‘000‘000 h

Isolation voltage (60 sec.) 1’500 VDC

Isolation capacitance (100 kHz, 1V) 60 pF typ.

Isolation resistance (500 VDC) >10 Gohm

Switching frequency 50 to 120 kHz typ. (depend on load)

Physical Specifications

Casing material plastic (UL94V-0 rated)

Weight

single output models: 1.5 g (0.05 oz)

dual output models: 2.2 g (0.08 oz)

Lead-free reflow solder process as per J-STD-020BD.1 (www.jedec.org)

Moisture sensivity level (MSL) level 2 as per J-STD-033B.1 (to find at:

www.jedec.org - free registration required)

Washing process not recommended. Product non-hermetical

Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com

Page 2 of 4

Share Link: