GO1515-CTA Ver la hoja de datos (PDF) - Gennum -> Semtech
Número de pieza
componentes Descripción
Fabricante
GO1515-CTA Datasheet PDF : 4 Pages
| |||
HD-LINX ™ GO1515
Voltage Controlled Oscillator
FEATURES
• generates 1.485GHz or 1.485/1.001GHz signal for
HD-LINX™ ICs
• low current consumption
• 50Ω output impedance
• operates from a single 5V supply
• 8 pin tape on reel
APPLICATIONS
VCO for the following HD-LINX™ ICs: GS1515, GS1522,
GS1540, GS1545.
ORDERING INFORMATION
PART NUMBER
PACKAGE
GO1515 - CTA
8 pin tape on reel
TEMPERATURE
0°C to 70°C
DESCRIPTION
DATA SHEET
The GO1515 is a self contained, miniature Voltage
Controlled Oscillator (VCO) that is used in conjunction with
Gennum’s HD-LINX™ ICs. It produces a clean 1.485GHz
reference clock signal for such devices as the GS1515
HDTV Reclocker and other HD-LINX™ devices. The control
voltage range is from 3.10 volts to 4.65 volts and is derived
from the on-chip PLLs. The GO1515 frequency can be
pulled approximately 16MHz for every one volt of control.
The output level is approximately 1.0dBm with low spurious
and noise content. It is designed to drive 50Ω strip lines.
The GO1515 VCO is used with the following HD-LINX™ ICs;
GS1515, GS1522, GS1540, GS1545 and is ordered as a
separate item. The VCO requires a single 5V supply and
draws a maximum of 15mA of current. It is packaged in a
miniature 8-pin proprietary surface mount package and
operates over the normal commercial temperature range of
0°C to +70°C.
VCTR
47pF
VCC
1000pF
3.3pF
STRIPLINE
STRIPLINE
2pF
OSCILLATOR CIRCUIT
OUT
GND
BLOCK DIAGRAM
Revision Date: March 2000
Document No. 522 - 40 - 02
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3
Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946 E-mail: info@gennum.com
www.gennum.com
Share Link: 