TL061AMD/MDT Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza

componentes Descripción

Fabricante

TL061AMD/MDT

Low power JFET single operational amplifiers

STMicroelectronics 

TL061-TL061A-TL061B

Absolute maximum ratings and operating conditions

2

Absolute maximum ratings and operating conditions

Table 1. Absolute maximum ratings

Symbol

Parameter

VCC

Vi

Vid

Ptot

Tstg

Rthja

Rthjc

ESD

Supply voltage (1)

Input voltage (2)

Differential input voltage(3)

Power dissipation

Output short-circuit duration (4)

Storage temperature range

Thermal resistance junction to

ambient(5) (6)

SO-8

DIP8

Thermal resistance junction to

case(5) (6)

SO-8

DIP8

HBM: human body model(7)

MM: machine model(8)

CDM: charged device model(9)

Value

Unit

TL061M, AM, BM TL061I, AI, BI TL061C, AC, BC

±18

V

±15

V

±30

V

680

mW

Infinite

-65 to +150

-65 to +150

-65 to +150

°C

°C/W

125

85

°C/W

40

41

800

V

200

V

1.5

kV

1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages

where the zero reference level is the midpoint between VCC+ and VCC-.

2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less.

3. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.

4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure

that the dissipation rating is not exceeded.

5. Short-circuits can cause excessive heating and destructive dissipation.

6. Rth are typical values.

7. Human body model: 100pF discharged through a 1.5kΩ resistor between two pins of the device, done for all couples of pin

combinations with other pins floating.

8. Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between two pins of the device

with no external series resistor (internal resistor < 5Ω), done for all couples of pin combinations with other pins floating.

9. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to

the ground.

Table 2.

Symbol

Operating conditions

Parameter

TL061M, AM, BM TL061I, AI, BI TL061C, AC, BC Unit

VCC Supply voltage range

6 to 36

V

Toper Operating free-air temperature range

-55 to +125

-40 to +105

0 to +70

°C

3/14

Share Link: