STV0676 Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza

componentes Descripción

Fabricante

STV0676

CMOS Digital Camera Co-processor

STMicroelectronics 

STV0676

2.4.1 EEPROM format and contents

Table 8: EEPROM format and contents

location

0

1

2

3

4

5

6

7

8

9

10

11

12

13

contents

fixed number, must be 0x’ED

fixed number, must be 0x’15

reserved, must be 0x’00

max device power (=mA/2, e.g. 400mA enter 0x’C8)

VidLo, low byte of the vendor ID

VidHi, highbyte of the vendor ID

PidLo, low byte of the product ID

PidHi, highbyte of the product ID

manufacturer string offset, example below

product string offset, see below

interface 0 String offset

reserved, must be 0x’00

reserved, must be 0x’00

checksum

External interfaces

The remaining space is available for the string blocks indexed at locations 8, 9 and 10.

2.4.2

Strings

The strings referred to above (locations 8-10), are the USB string descriptors referenced from the

device, configuration and interface descriptors. The value should be set to ’0’ if the string is not

implemented or to the offset in bytes of the start of the string block in the EEPROM.

The first byte of each string block is the number of the characters in the string. Subsequent bytes

are the actual string, which need not include a terminating null (Table 9:).

Table 9: EEPROM device string example

Location

8

16

17

18

19

20

21

Contents

Manufacturer string offset = 16

String length = 5

String text = ‘H’ (in ascii)

String text = ‘e’ (in ascii)

String text = ‘l’ (in ascii)

String text = ‘l’ (in ascii)

String text = ‘o’ (in ascii)

11/21

Share Link: